Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Press A again to return to the previous screen. Date Hour : Minutes Operation Guide 5055 3 Signal Reception Troubleshooting Check the following points whenever you experience problems with signal reception. • You performed some button operation during the auto receive operation. • The watch is not in the Timekeeping Mode or World Time Mode. • The watch is in a location where the signal cannot be received for some reason. • A countdown timer operation is in progress. • Radio interference is often present during the day time, which can interfere with calibration signal reception. I can’t receive a time calibration signal. • Perform manual signal receive at night or wait until the next auto signal receive operation is performed. • Enter the Timekeeping Mode or World Time Mode and try again. • Enter the Countdown Timer Mode and stop the countdown. • Check to make sure the watch is in a location where it can receive the signal. Problem Probable Cause What you should do Time setting is incorrect following signal reception. • If the time is one hour off, the DST setting may be incorrect. • The Home City code setting is not correct for the area where you are using the watch. • The home position of the hands is off. • Change the DST setting to Auto DST. • Select the correct Home City code. • Enter the home position adjustment mode and adjust the home position. • For further information, see “Important!” under “Time Calibration Signal Reception” and “Radio-controlled Atomic Timekeeping Precautions”. World Time World Time shows the current time in 48 cities (29 time zones) around the world. A simple operation swaps your Home City with the currently selected World Time city. • The times kept in the World Time Mode are synchronized with the time being kept in the Timekeeping Mode. If you feel that there is an error in any World Time Mode time, check to make sure you have the correct city selected as your Home City. Also check to make sure that the current time as shown in the Timekeeping Mode is correct. • Select a city code in the World Time Mode to display the current time in any particular time zone around the globe. See the “City Code Table” for information about the UTC offset settings that are supported. • All of the operations in this section are performed in the World Time Mode, which you enter by pressing C. City code Current time in selected city To view the current time in another time zone In the World Time Mode, use D to scroll through available city codes (time zone). Holding down the button scrolls at high speed. • When the city code (time zone) you want is selected, you can press A to display the date. After about one second, the watch will resume regular timekeeping. Press A. One second Hour : Minutes Seconds Date To toggle a city code time between Standard Time and Daylight Saving Time 1. In the World Time Mode, press D to display the city code (time zone) whose Standard Time/Daylight Saving Time setting you want to change. 2. Hold down A for about three seconds to toggle between Daylight Saving Time (DST indicator displayed) and Standard Time (DST indicator not displayed). • The DST indicator is shown on the World Time Mode screen while Daylight Saving Time is turned on. DST indicator Swapping your Home City and World Time City You can use the procedure below to swap your Home City and World Time city. This changes your Home City to your World Time city, and your World Time city to your Home City. This capability can come in handy when you frequently travel between two cities in different time zones. • If your current World Time city supports receipt of a time calibration signal, making it your Home City enables calibration signal reception. • For information about which cities support time calibration signal reception, see “To specify your Home City”. To swap your Home City and World Time city 1. In the World Time Mode, use D to select the World Time city you want. 2. Hold down A and B until the watch beeps. • This will make the World Time city (which you selected in step 1), your Home City. At the same time, it changes the Home City you had selected prior to step 2 your World Time city. • After swapping the Home City and World Time city, the watch stays in the World Time Mode with the city that was selected as the Home City prior to step 2 now displayed as the World Time city. Stopwatch The stopwatch lets you measure elapsed time, split times, and two finishes. • The digital display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds. • The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. • The stopwatch hand will function as a 1/20-hand during the first second of an elapsed time operation. After that, it will function as a second hand until the first minute elapses. After that it will function as a minute hand. Whenever an elapsed time operation is stopped, the stopwatch hand will indicate the current seconds count. • The stopwatch measure...