Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
• The DST setting was changed manually in the World Time Mode. • You pressed a button while signal receive was in progress. • Even if receive is successful, the Settings updated indicator will disappear from the display each day when the first auto receive operation of the day is performed. • Time data (hour, minutes, seconds) only was received during the last receive operation. The Settings updated indicator appears only when time data and date data (year, month, day) are both received. Cannot perform manual receive. Auto receive is turned on, but the Settings updated indicator does not appear on the display. • Enter the Timekeeping Mode and try again. • Select LIS, LON, MAD, PAR, ROM, BER, STO, ATH, MOW, HKG, BJS, TPE, SEL, TYO, HNL, ANC, YVR, LAX, YEA, DEN, MEX, CHI, NYC, YHZ, or YYT as your Home City. • Perform manual signal receive or wait until the next auto signal receive operation is performed. • Check to make sure the watch is in a location where it can receive the signal. Problem Probable Cause What you should do Signal Reception Troubleshooting Check the following points whenever you experience problems with signal reception. • For further information, see “Important!” under “Time Calibration Signal Reception” and “Radio-controlled Atomic Timekeeping Precautions”. • If the time is one hour off, the DST setting may be incorrect. • The Home City code setting is not correct for the area where you are using the watch. • Change the DST setting to Auto DST. • Select the correct Home City code. Time setting is incorrect following signal reception. Tide/Moon Data In the Tide/Moon Data Mode, you can see the current tide and the current date’s Moon phase for your Home City. You can specify a date and view tide and Moon data for that date. • See “Moon Phase Indicator” for information about the Moon phase indicator and “Tide Graph” for information about the tide graph. • All of the operations in this section are performed in the Tide/Moon Data Mode. Note • It takes about two seconds to calculate tide graph data. You will not be able to display a setting screen while data calculation is in progress. • Moon age is calculated to an accuracy of ±1 day. Tide Data The Tide Graph that appears first when you enter the Tide/Moon Data Mode shows the data at 6:00 a.m. for your currently selected Home City on the current date, according to the Timekeeping Mode. From there you can specify another date or time. • If the tide data is not correct, check your Timekeeping Mode settings and correct them if necessary. • If you feel that the information shown by the Tide Graph is different from actual tide conditions, you need to adjust the high tide time. See “Adjusting the High Tide Time” for more information. Moon Data The Moon phase and Moon age information that appears first when you enter the Tide/Moon Data Mode shows the data at noon for your currently selected Home City on the current date, according to the Timekeeping Mode. After that you can specify another date to view data. • If the Moon data is not correct, check your Timekeeping Mode settings and correct them if necessary. • If the Moon phase indicator shows a phase that is a mirror image of the actual moon phase in your area, you can use the procedure under “Reversing the Displayed Moon Phase” to change it. Tide/Moon Data Screens In the Tide/Moon Data Mode, press A to toggle between the tide data screen and the Moon data screen. lllllllllll Tide Data Screen Moon Data Screen Current tide range Current tide level Month – Day Moon phase Time Moon age Press A. Month – Day • When you display the Tide Data Screen, it initially shows tide data for 6:00 a.m.. • Use the Tide Data Screen to specify the Tide Data time. You can use D (+) and B (–) to change the displayed time in one-hour increments. • Use the Moon Data Screen to specify the Tide/Moon Data date. You can use D (+) and B (–) to change the displayed date in one-day increments. Pressing D and B will display the year of the displayed date. Adjusting the High Tide Time Use the following procedure to adjust the high tide time within a particular date. You can find out high tide information for your area from a tide table, the Internet, or your local newspaper. To adjust the high tide time 1. In the Tide/Moon Data Mode, hold down A until the hour digits start to flash. 2. Use D (+) and B (–) to change the hour setting. 3. When the hour is the setting you want, press C. • This will cause the minute digits to flash. 4. Use D (+) and B (–) to change the minute setting. 5. When the minute setting is the way you want, press A to exit the adjustment screen and return to the Tide/ Moon Data Mode screen. • Pressing D and B at the same time while the time adjustment screen is displayed (steps 2 through 5 above) will return the high tide time to its initial factory default setting. • The high tide time setting is not affected by the DST (summer time) setting of the Timekeeping Mode. lllllllllllllll l ll l lllllll l lll Hour l...
Dieses Handbuch ist für folgende Modelle:Armbanduhren - 3200 (1.1 mb)