Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Display low battery indication. b LED light • Blink when the sensor synchronizes with the main unit. c °C/°F slide • Toggle between Centigrade (°C) and Fahrenheit (°F) temperature. d Channel 1/2/3 • Toggle between different RF channels to transmit signals. e d g f a b c e RESET • Reset to star t transmission. f Sensor support g Door lock Get started Caution • Use of controls or adjustments or per formance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install battery Caution • Risk of explosion! Keep bat teries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of product damage! When the apparatus is not used for long periods, remove the batter y. To install batteries into the main unit 1 Open the battery compartment. 2 Insert 4 AAA batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment. To install batteries into the sensor 1 Open the battery compartment. 2 Insert 2 AA batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment. Note • Batteries contain chemical substances, so they should be disposed of properly. Mount on wall You can also mount the main unit on a wall. 1 Choose a location on the wall. 2 Clinch two screws into the wall. 48 mm (1.89") 3 Hook the main unit on the wall. Tip • Ensure the distance between the screws is 48 mm, and leave at least 5 mm to mount the main unit on. Install the stand The batter y compar tment cover can be installed with the inside out to suppor t the unit. Connect power Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. • Before connecting the AC adaptor, ensure you have completed all other connections. Note • The type plate is located on the back of the main unit. 1 Connect the supplied AC adaptor to the DC socket on the main unit and to the AC outlet. Connect the sensor to the main unit Note • Ensure the sensor is loaded with batteries. 1 Place the sensor to a desired location, within 10 meters away from the main unit. • For first time use, press RESET on both the main unit and the sensor. » The main unit star ts to receive transmission from the sensor. • To update the outdoor temperature, press an hold DATE . Set time and date Set date and time automatically 1 Press and hold SET TIME for 2 seconds. » The clock automatically synchronizes the current Central European time and date. Set date and time manually 1 Press SET TIME. » Year digits begin to blink. 2 Press / to set year. 3 Press SET TIME to confirm. 4 Repeat the above steps to set the month, day, hour, and minute. 5 Set the alarm timer Note • Before you star t, ensure that the clock is set correctly. You can set two separate alarm timings. 1 Press AL 1/AL 2 . » The Alarm 1/ALarm 2 icon is displayed. 2 Press and hold AL 1/AL 2. 3 Press / to set the hour, then press AL 1/AL 2 to confirm. 4 Press / to set the minute, then press AL 1/AL 2 to confirm. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL . » The alarm repeats ringing 9 minutes later. Turn on/off the alarm timer Note • Ensure that you already set the alarms successfully. » If the alarm timer is turned on, AL1 or AL2 appears. »If the alarm timer is turned off, disappears. 6 Other features Press AL 1/AL 2 repeatedly to turn on or off the alarm timer. Improve the sensor reception To improve the sensor reception, you can: 1 slide CHANNEL to 2 or 3. 2 Reduce the distance between the sensor and the main unit. 3 Press and hold DATE for 4 seconds to search for the remote signal. Tip • If channel is swif ted,you need to unplug the adaptor and connect power again. Adjust display infomation 1 Press DISPL AY repeatedly to toggle between outdoor temperature, indoor temperature and humidity. Weather forecast The unit predicts weather for an area of 50 km in the next 12 or 24 hours. Symbol Weather Light color Sunny Par tly cloudy Cloudy Amber Light blue Blue Rainy Purple Stormy Red Symbol Weather Light color Snow White Tip • When the main unit is powered by bat ter y, the light turns on for 10 seconds after any operation. • When powered by AC mains supply, the light always turns on. • To activate the auto dim function, press and hold REPEAT ALARM/ BRIGHTNESS CONTROL for 10 seconds. Adjust display brightness 1 Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly to select different levels of display brightness. 7 Product information Note • Product information is subj...