Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
When power is connected, the set time is displayed automatically. The built-in lithium batter y can maintain clock setting despite power interruption. Select time zone If the hour digits of the preset time do not match your local time, you need adjust the time zone settings. 1 In standby mode, press TIME ZONE. » The current time zone number blinks on the display panel. 2 Press TIME ZONE repeatedly to select time zone (-1 to +12 adjustable). For Europe: Western European Time (WET) +0 Central European Time (CET) +1 (De fault) Eastern European Time (EET) +2 Moscow Standard Time (MST) +3 Set clock In standby mode, you can set clock manually. 1 Press and hold SET TIME for 2 seconds.. » The hour digits blink. 2 Rotate + TUNING - to adjust hour. 3 Press SET TIME " » The minute digits blink. 4 Repeat steps 2-3 to set the minute and 12/24 hour format. Tip . You can also press 12/24H·DST repeatedly to select 12/24 hour format. EN 6 Replace battery Note . You can only use AC power as power supply.The pre- installed lithium CR2032 battery can only back up clock and alarm settings. When power is disconnected, the display backlight is off. When the •••••• batter y indicator is displayed, replace the batter y as illustrated. 4 Main features Listen to FM radio Note . Position the antenna as far as possible from TV,VCR, or other radiation sources. . For optimal reception, fully extend and adjust the position of the antenna. 1 Press RADIO to turn on FM radio. . To turn FM radio off, press RADIO again. 2 Rotate + TUNING -to tune to an FM radio station. Listen to relaxing music With this clock radio, you can get relaxed by listening to realistic nature sounds and soft music. 1 In standby mode, press MUSIC to activate sounds stored in the clock radio. To stop playing the music, press MUSIC again. 2 Rotate + TUNING -to select a sound. The 15 sounds are listed below: Sound sequence Sound name 1 Rain 2 Thunderstorm 3 Stream 4 Ocean 5 Night forest 6 B 7 Wind 8 Wind chime 9 Train 10 Space 11 Hear tbeat 12 White noise 7 EN 13 Sleep music 1 14 Sleep music 2 15 Sleep music 3 Enjoy mood light This clock radio provides you with changeable mood light.You can adjust the color of the light to match your mood. To turn the mood light on or off: 1 In standby mode, press LIGHT to turn the mood light on. . You can press LIGHT twice to dim the brightness of the mood light. 2 To turn the mood light off, press LIGHT again. To select a color of the mood light: Press LIGHTCOLOR repeatedly to select a color. Adjust volume Rotate VOL to adjust volume. VOL 5 Other features Set alarm timer Note Make sure that you have set the clock correctly. 1 In standby mode, press and hold ALARM for 2 seconds to activate alarm setting. » The hour digits blink. 2 Rotate + TUNING - to adjust hour. 3 Press ALARM " » The minute digits blink. 4 Repeat steps 2-3 to set the minute. 5 Repeat steps 2-3 to select an alarm source. . TUNE and FM icon: select your last listened FM channel as alarm sound. FM BUZ and icon: select buzzer as alarm sound. Nx (1-5) and icon: select one from sound. 6 Repeat steps 2-3 to set the alarm volume. » The alarm time and icon are displayed. EN 8 < $ +. n1 Bell n2 Jungle n3 Bird n4 Wake music 1 n5 Wake music 2 Activate/deactivate the alarm timer Press ALARM repeatedly. » The alarm icon appears if the alarm timer is on and disappears if it is off. Snooze alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 30 60 90 120 Select daylight saving time (DST) mode For countries with daylight saving time (DST), the clock radio offers you DST option to adjust summer time. In standby mode, press and hold 12/24H·DST for two seconds. » The clock advances by one hour. Note To exit DST mode, repeat the above operation. Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels: high, mid, and low. OFF 9 EN 6 Product information Note Product information is subject to change without prior notice. . Rated Output Power 0.6W RMS Speaker Speaker Impedance 8 ohm Speaker Driver 1.5'' Tuner Tuning Range FM: 87.5 - 108 MHz Tuning grid FM: 50 KHz Sensitivity - Mono, 26dB S/N RatioFM: <22 dBf - Stereo, 46dB S/N Ratio FM: <51.5 dBf Search Selectivity FM: <28 dBu Total Harmonic Distor tion FM: <5% Signal to Noise Ratio FM: >50 dBA General information AC Power Operation Power Consumption Standby Power Consumption Dimensions 100-240 V, 50/60 Hz 3 W <1 W - Main Unit (W x H x D) 144 x 144 x 65 mm Weight -With Packing0.73 kg -Main Unit 0.45 kg 7 Troubleshooting Warning Never remove the casing of this clock radio. To keep the warranty valid, never tr y to repair the clock radio yours...