Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
••Never lubricate any part of this clock radio. ••Never place this clock radio on other electrical equipment. ••Keep this clock radio away from direct sunlight, naked flames or heat. ••Make sure that you always have easy access to the power cord, plug or adaptor to disconnect the clock radio from the power. • Make sure that there is enough free space around the product for ventilation. • The clock radio shall not be exposed to dripping or splashing. • Do not place any sources of danger on the clock radio (e.g. liquid filled objects, lighted candles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. • Only use power supplies listed in the user manual. • Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • The batteries should not be exposed to excessive heat such as sunshine fire or the like. 2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at What's in the box AJ6000User Manualthere to help youRegister your product and get support at Question? Contact Philips 3 EN Overview of the main unit abcdjefghiklmNI OIDUA a SOURCE • Select a source.(FM/AUDIO IN) • Press and hold for 3 seconds to switch to standby mode. b SLEEP • Set sleep timer. c SNOOZE/BRIGHTNESS • Snooze alarm. • Adjust display brightness. d Display panel • Show current information. e AL1/AL2 • View alarm settings. • Activate or deactivate alarm timer. f VOLUME +/- • Adjust volume. g First Knob (HOUR/PRESET) • Adjust hour. • Select a preset radio station. h Second Knob (MINUTE/TUNING) • Adjust minute. • Tune to an FM radio station. • Skip to the previous or next track. i Third Knob (SET TIME/SET RADIO/ CLOCK/SET AL1/SET AL2) • Set clock. • Scan/store FM radio stations. • Set alarm. EN j BUZZ/FM/SOUND 1/SOUND 2 • Select an alarm source for Alarm 1 and Alarm 2. k (5.0 V 1 A) • Charge your iPod/iPhone through USB cable (not included). l AUDIO IN • Connect an external audio device. m FM ANT • Improve FM reception. 3 Get started Always follow the instructions in this chapter in sequence. Connect power The unit can only be powered by supplied AC power. Batteries are only used for alarm backup if not connected with AC power. Option 1: AC power Warning ••Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. ••Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord. Connect the AC power cord to the wall socket. Tip ••To save energy, turn the unit off after use. EN Option 2: Battery power Caution ••Batteries contain chemical substances, so they should be disposed of properly. Note ••Batteries are not supplied with the accessories. ••bAt shows on the display when the battery level is low. 1 Open the battery compartment. 2 Insert 2 batteries (type: 1.5V LR6/AA) with correct polarity (+/-) as indicated. 3 Close the battery compartment. Set time 1 Rotate the Third Knob to "SET TIME" to activate clock setting mode. »»Hour and minute digits blinks. 2 Rotate the First Knob to adjust the hour. 3 Rotate the Second Knob to adjust the minute. 4 Press OK on the First Knob to confirm. »»The setting time is displayed. 5 Rotate the Third Knob to CLOCK after setting. »»The hour and minute digits stops blinking. Turn on The clock radio turns on automatically once your plugged in. Switch to standby mode Press SOURCE for 3 seconds to switch to standby mode. »»The source indicator on the display panel turns off. EN 4 Listen to FM radio Tune to FM radio stations Tip ••Position the antenna as far as possible from TV, VCR, or other radiation source. ••For better reception, fully extend and adjust the position of the antenna. Note ••Make sure that the Third Knob switched to CLOCK before setting. 1 Press SOURCE repeatedly to select FM tuner source. »»FM on the display panel lights up. 2 Rotate and hold the Second Knob for two seconds. »»The clock radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune in to more radio stations. To tune to a station manually: Rotate the Second Knob repeatedly until you find optimal reception. Store FM radio stations manually 1 In FM mode,rotate the Third Knob to "SET RADIO". »»FM begins to blink. 2 Rotate and hold the Second Knob for 2 seconds. »»The last selected channel show on the display. 3 Rotate the First Knob again to select the target preset position. 4 Press OK on the First Knob to confirm. 5 Repeat steps 2-4 to store other stations. Note ••To remove a pre-stored...