Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 532.16 kb Dateiname: Unterrichtssprache:

» The minute digits blink. 4 Repeat steps 2-3 to set the minute, select an alarm source ([BUZZ], [DOCK] or [FM]), and adjust the alarm volume. » The corresponding alarm icon lights up. Note • If iPod/iPhone is selected as alarm source, but no iPod/ iPhone is connected, the device switches to buzzer instead. • The gentle wake-up function is available for [DOCK] and [FM] source. Tip • With the Philips HomeStudio application installed on your iPod/iPhone, you can also select the nature sounds in the application as alarm sound. Activate/deactivate the alarmtimer 1 Press AL1 (or AL2) to view alarm settings. 2 Press AL1 (or AL2) repeatedly to select [ON] or [OFF]. • [ON]:The alarm timer is activated. • [OFF]: The alarm timer is deactivated. » AL1 (or AL2) is displayed when the alarm timer is activated. » AL1 (or AL2) disappears when the alarm timer is deactivated. Snooze the alarm When an alarm sounds, press SNOOZE. » The alarm repeats after 9 minutes. Stop the alarm When an alarm sounds, press AL1 (or AL2). » The alarm stops and then repeats at the same time of next day. EN 6 5 Use the dock You can enjoy audio from a compatible iPod/ iPhone through this product. An application Philips HomeStudio is available on Apple App Store for this product. To enjoy full features, download and install the application to your iPod/iPhone. Compatible iPod/iPhone models The product suppor ts the following iPod and iPhone models. Made for • iPod classic • iPod touch (2nd, 3rd, and 4th generation) • iPod nano (4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G Enjoy audio 1 Press the knob repeatedly to select [DOCK] mode. 2 Connect your iPod/iPhone to the dock. » The iPod/iPhone begins to charge automatically. 3 Play audio on the iPod/iPhone. EN 6 Listen to radio Note • Keep the unit away from other electronic devices to avoid radio interference. • For better reception, do not place iPod/iPhone into the dock when you listen to the radio. Fully extend and adjust the position of the FM antenna. 1 Press the knob repeatedly to switch the source to [FM]. 2 Search for a radio station manually or automatically. To search for a radio station manually: • Rotate TUNING until the frequency of target station is displayed. To search for a radio station automatically: • Rotate TUNING and then press the knob within two seconds. » The radio tunes to a station with strong signals automatically. 7 Play from anexternal device Note • The product switches to AUX mode automatically when an audio input cable is connected. 1 Connect an audio input cable with a 3.5mm connector on both ends between • the AUDIO IN socket on the back of this product, and • the headphone socket of an external device. 2 Play audio on the external device (see the user manual of the device). EN 8 Use the sleep timer Press SLEEP on the back of the product repeatedly to select a time period (in minutes). » When the sleep timer is activated, appears. » After the set period, the product switches to standby mode. • To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 15 30 60 90 120 9 Adjust volume During play, rotate the knob to adjust volume. Note • When an alarm sounds, you cannot adjust volume. OFF EN 10 Product Amplifier information Rated Output Power Signal to Noise Ratio > 67 dBA 4 W RMS Total Harmonic Distor tion < 1% Note Audio In (MP3 link) 0.6 V RMS 20 kohm • Product information is subject to change without prior notice. General information AC power adaptor Model No.: OH1015A0592000U1- VDE Brand name: Philips Input: 100-240 V~, 50/60Hz, 350 mA; Output: 5.9 V 2 A Operation Power Consumption 10 W Standby Power Consumption < 1 W Dimensions: - Main Unit (W x H x D) 245 x 123 x 122 mm Weight: -Main Unit 1.1 kg Tuner (FM) Tuning range 87.5 - 108 MHz Tuning grid 50 kHz Sensitivity - Mono, 26 dB S/N Ratio < 22 dBu - Stereo, 46 dB S/N Ratio < 43 dBu Search Selectivity > 28 dBf Total Harmonic Distor tion < 2% Signal to Noise Ratio > 55 dB EN 10 11 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never tr y to repair the product yourself. If you encounter problems when using this product, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page (t). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the unit is connected properly. • Ensure that there is power at the AC outlet. No sound • Adjust the volume. Poor radio reception • Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. Alarm does not work • Set the clock/alarm correctly. Clock/alarm setting erased • Power has been interrupted or the power plug has been disconnected. • Reset the clock/alarm. 12 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consume...

Herunterladen

Geben Sie zwei Ziffern: