Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Heed all warnings. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, Protect the power cord from being walked on or pinched, par ticularly at plugs, convenience receptacles, and the point where they exit from the clock radio. Unplug this clock radio during lightning storms or when unused for long periods of time. ! " ! when the clock radio has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the clock radio, the clock radio has been exposed to rain or moisture, does not operate normally, or has been dropped. Batter y usage CAUTION – To prevent batter y leakage which may result in bodily injur y, proper ty damage, or damage to the clock radio: Install the batter y correctly, + and - as marked on the clock radio. disconnect device, the disconnect device shall remain readily operable. Your clock radio Congratulations on your purchase, and welcome to Philips! To fully & What’s in the box (Fig. ) Get started Always follow the instructions in this chapter in sequence. Install battery The batter y can only back up clock and alarm settings. Caution #' )* 0 2 Tip The display backlight is off when AC power is disconnected. Connect power (Fig. ) Caution . Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. . Risk of electric shock! When you unplug the power adapter, always pull the plug from the socket. Never pull the cord. Note The type plate is located at the bottom of the clock radio. Set time (Fig. ) Note You can only set time in standby mode. Tune to FM radio stations (Fig. ) Store FM radio stations manually You can store up to 10 FM radio stations. 1 Tune to an FM radio station. 2 Press and hold PRESET for two seconds. » The preset number begins to blink. 3 Press TUNING repeatedly to select a number. 4 Press PRESET . 5 Repeat steps 1 to 4 to store other stations. Tip To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET repeatedly to select a preset number. Adjust volume Other features Set alarm timer Set alarm Note . You can only set the alarm in standby mode. . When alarm sounds, volume rises gradually. You cannot adjust the alarm volume manually. . Make sure that you have set the clock correctly. ;0 ; AL1 < AL2: set the second alarm. Tip The clock radio exits alarm setting mode when being idle for 10 seconds. Activate/deactivate the alarm timer Press AL1 or AL2 repeatedly to activate or deactivate the alarm timer. (Fig. . » If the alarm timer is deactivated, the alarm indicator turns off. » The alarm repeats ringing for the next day. Snooze the alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. (Fig. To deactivate the sleep timer: Press SLEEP repeatedly until [OFF] . Product information Note Product information is subject to change without notice. Tuner (FM) Tuning range 87.5-108 MHz Tuning grid 50 KHz " 6@ =LQ"2 <22 dBf 6" SLQ"2 <51.5 dBf Total Harmonic Distor tion <3% "2 >50 dBA General information ]^ 0 0 . Brand name: Philips; @<]">`>6>L>6{{>|>} Input: 100-240 V~, 50/60 Hz; 0.15 A; Output: 6 V 0.5 A Operation Power Consumption 5 W "&0 ^ <1 W Dimensions: @.?'.'. 130 x 46 x 130 mm Weight: -Main Unit 0.26 kg -With Packing 0.4 kg Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser vice. If the problem remains & 0000 ? you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power { ]^ 0 { 0 ]^ No sound . Adjust the volume. No response from the unit . Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception . Increase the distance between the unit and your TV or VCR. . Fully extend the FM antenna. Alarm does not work Notice ] ' approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference ! { ^ Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the { . =>>=.L{^ Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose...