Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Casio, modell PQ-60

Hersteller: Casio
Dateigröße: 557.7 kb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


•The backlight of this clock employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use. •The clock emits an audible sound whenever the display is illuminated. It does not indicate malfunction of the clock. Important! •Overuse of the light can shorten battery life. THERMOMETER FUNCTIONS A built-in sensor measures temperature and shows the measured value on the display. Temperature Measurements •The temperature display shows “Lo” for temperatures below –19.5°C and “HI” for temperatures above 70°C. •Though temperature readings are displayed up to 0°C and greater than 41°C, note that such readings are actually outside the guaranteed temperature range of this clock. BATTERYREPLACEMENT Replace the battery whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove the old battery. 3. Load a new battery. Make sure that the positive (+) and negative (–) ends of the battery are facing correctly. An incorrectly loaded battery can burst and damage the clock. 4. Replace the battery compartment cover. Battery precautions •Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician immediately. •Be sure to load the battery with its positive (+) and negative (–) ends facing correctly. •Never charge the battery that comes with the clock. •Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. •Replace the battery at least once a year, even if the current battery is working properly. •The battery that comes with the clock loses some power during transport and storage. Operation Guide PQ-60 2 Alarm Mode selector Description The alarm sounds at the preset time for one minute. You can stop the alarm by pressing the SNOOZE/LIGHT button 1. The snooze feature will cause the alarm to sound again about five minutes after it stops. A indicator flashes on the display during the period between alarms. •If you keep stopping the alarm manually by pressing the SNOOZE/LIGHT button 11111The alarm will sound again, about five minutes after you stop it. •If the alarm is not stopped manually The alarm will sound three times for one minute, at five-minute intervals. After that the snooze feature will be cancelled automatically. •If the alarm is stopped once with the SNOOZE/LIGHT button 11111 but not stopped manually after that The alarm will sound one more time five minutes after you stop it. After that the snooze feature will be cancelled automatically. The alarm sounds at the preset time for one minute. The alarm does not sound. SNOOZE ON OFF •The light also turns on for the first five seconds that the alarm sounds. USING THEALARM The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of the alarm operation as well. The alarm tone alternates between ...

Dieses Handbuch ist für folgende Modelle:
Time Clocks - MA0611-EC (557.7 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien