Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Be sure to remove the sticker before using the clock. •Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. •Open the front cover and swing it to the back of the clock as shown in the illustration. Do not apply excess force to the cover when opening it. Alarm Off Alarm On Press to close. Front cover GENERAL GUIDE 11111Snooze/Light button •Press to turn on the backlight for three or four seconds. •Pressing this button while the alarm is sounding stops the alarm. 22222Alarm Time Set buttons Use these buttons to set the alarm time or current time. 33333SET button Use this button when setting the current time. 44444RESET button Press to reset the clock after replacing batteries. 55555Alarm Switch Use this switch to turn the alarm on and off, and to turn on the snooze alarm. SETTING THE TIME 1. Press the SET button (33333) to cycle through the setting screens as shown below. Time Setting Screen Normal Timekeeping Screen Year Setting Screen 12-hour/24-hour Timekeeping Screen Snooze on indicator Alarm time Alarm on indicator Day of the week Current time (Hour, minutes, seconds) DATE (month - date) PM indicator USER’S GUIDE PQ-40 1 •A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using the clock. •Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. •Open the front cover and swing it to the back of the clock as shown in the illustration. Do not apply excess force to the cover when opening it. Alarm Off Alarm On Press to close. Front cover GENERAL GUIDE 11111Snooze/Light button •Press to turn on the backlight for three or four seconds. •Pressing this button while the alarm is sounding stops the alarm. 22222Alarm Time Set buttons Use these buttons to set the alarm time or current time. 33333SET button Use this button when setting the current time. 44444RESET button Press to reset the clock after replacing batteries. 55555Alarm Switch Use this switch to turn the alarm on and off, and to turn on the snooze alarm. SETTING THE TIME 1. Press the SET button (33333) to cycle through the setting screens as shown below. Time Setting Screen Normal Timekeeping Screen Year Setting Screen 12-hour/24-hour Timekeeping Screen Snooze on indicator Alarm time Alarm on indicator Day of the week Current time (Hour, minutes, seconds) DATE (month - date) PM indicator USER’S GUIDE PQ-40 2 2. While the screen you want is on the display, use the Alarm Time Set buttons (22222) to change the digits that are flashing. •The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNZ. •The backlight also turns on for the first four seconds that the alarm sounds. •The alarm sound changes over five levels as it sounds. Stopping the Alarm •When alarm is sounding, press the Snooze/Light button (11111) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. •To turn off the snooze feature, slide the Alarm Switch (55555) to OFF. USING THE LIGHT Pressing the Snooze/Light button (11111) turns on the light and illuminates the display for easy reading in the dark. Important! •Overuse of the light can shorten battery life. BATTERYREPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Pressing down lightly on the battery compartment cover, slide it downwards and remove it. 2. Remove both old batteries. 3. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. 4. Replace the battery compartment cover. 5. Press the RESET button (44444). Be sure to press the RESET button (44444) after replacing batteries. Battery precautions •Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly. •Replace the batteries at least once a year, even if the current batteries are working properly. •Never charge the batteries that come with the clock. •Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. •The batteries that come with the clock lose some of their power during transport and storage. •Never mix old and new batteries, or batteries of different brands. Press + to increase the flashing digits. Press – to decrease the flashing digits. Alarm Time Press to change the alarm time setting (+). Press to change the alarm time setting (–). Alarm Time Set buttons •Holding down + or – changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Switch (55555) on the side of the clock to turn the alarm on and off, and to select the snooze feature. Alarm Switch Setting SNZ ON Zz ALM ON OFF Description The alarm sounds at the preset time for one minute, and seven more times every five minutes thereafter. Even if you ...