Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Accusplit Dateigröße: 637.48 kb Dateiname: Unterrichtssprache:

If the Alarm is OFF, pressing S2 will return you to the Time setting field. In Pre-Alarm set, you will see the word “ON” or “OFF,” plus TWO alarm •3 symbols. The Pre-Alarm symbol (smaller and on the left) will be flashing, along with ON or OFF. Press S3+ or S3– to turn the Pre-Alarm on or off. Pressing S2 again will return you to the Timer setting. Press S4 once (upper left) to exit setting mode. Leaving the watch unattended for 30 seconds in set mode causes it to save any changes and then exit set mode. Setting the Current Time of Day and Time of Day Alarm Press MODE (lower left) to change to Time of Day mode. Press and hold S1 (upper left) until the Hour “hand” and digits begin to flash, indicating that you have entered set mode. Press S2 (upper right) to cycle through the fields you can set. The fields are: Hour > Minute > Second > (Time of Day) Alarm On/Off > Alarm Hour > Alarm Minute > Hour Press S2 until the Hour hand and digits are flashing. Set the current Hour by pressing S3+ (lower right) to increase the Hour setting, or pressing S3– (lower left) to decrease the setting. Note that the watch has “AM” and “PM” indicators. Note: You can either press and release S3+ and S3– to change field values, or “press and hold” either of the S3 buttons to rapidly change the field value. From Hour setting mode, press S2 once to enter Minute setting. Minute hand and digits will be flashing. Set current Minutes using the S3 buttons. From Minute set, press S2 once to enter Second setting. The second hand will be flashing. Press either S3 button to reset seconds to zero. From Seconds set, press S2 once to enter Alarm setting. The letters “AL” will be flashing, and you will also notice that the watch hands have disappeared.You can turn the Time of Day alarm On or Off by pressing either S3 button. When On, you will see a small Alarm Bell \ next to the AL indicator. From Alarm On/Off, press S2 once to enter Alarm Hours setting.The “AL” indicator and the Hours digits will be flashing, and the clock hands will not be visible. Use the S3 buttons to set the desired Alarm Hour setting. From Alarm Hours, press S2 once to enter Alarm Minutes setting.The “AL” indicator and the Minutes digits will be flashing, and the clock hands will not be visible. Use the S3 buttons to set the desired Alarm Minutes setting. From any of the setting fields, press S4 once (upper left) to exit setting mode. Leaving the watch unattended for 30 seconds in set mode causes it to save any changes and then exit set mode. Changing the Battery When the display grows dim or goes out entirely, it is time for a new battery. Using a small Phillip’s head jeweler’s screwdriver, remove the four screws holding back of watch onto case. Gently slide the old battery from its slot, and replace with new CR2025 Lithium battery. Make sure that the positive (“+”) terminal side is facing up. Power Reset You can reset the watch to original factory settings by pressing S3+ and S3– (the two lower buttons) together, and holding for at least five seconds. Manufactured for TimeTimer, Inc. 7707 Camargo Road Cincinnati, OH 45243 (513) 561-4199 Fax (513) 561-4699 1-877-771-TIME (1-877-771-8463) U. S. PATENT NO. D369, 619 & 5,662,479 REGISTER NOW. Email __________________________ Please return your AX810TT registration to the Repair Center User ___________________________ address in the warranty, and we will let you know about future products. _______________________________ 5 YEAR NO-PROOF-OF-PURCHASE LIMITED WARRANTY Free service for first year (see back of watch for date). $15 fee applies thereafter. Return unit with daytime phone number to: AST Repair Center, 3090 Independence Drive, Suite 148 Livermore, CA 94551 USA 800-935-1996 • 925-290-1900 • support@ACCUSPLIT.com Developed by Time Timer LLC, in cooperation with Abilitations. www.ab...

Herunterladen

Geben Sie zwei Ziffern: