Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Accusplit Dateigröße: 652.32 kb Dateiname: Unterrichtssprache:

Now, carefully replace the back, squarely, since the back applies water resistance pressure to the gasket. Power Reset: Push L and R-Display turns OFF Release L and R-Display shows all segments ON, then displays stopwatch at 0:00.00 Left (L) Center (C) Right (R) S3 S4 S1 S2 REGISTER NOW Please copy & return this USER (not Owner) Registration to the Repair Center address on the warranty label, & we will let you know about future products. Most common use _ Telephone (optional) USER for your Model# ZIP OPERATING INSTRUCTIONS STOPWATCH ONLY Master Reset R(2sec)-Reset** Event R-Start R-Stop* (Display shows "SPLIT“) R(2sec)-Reset** Dual Split Memory with Split Counter R-Start (Shows Running DUAL Time) R-Split* (Top shows CUM 1, Bottom shows LAP 1) R-Split* (Top shows CUM 2, Bottom shows LAP 2) R-Split* (Top shows CUM 3, Bottom shows LAP 3) R-Split* (Top shows CUM 4, Bottom shows LAP 4) R(2sec)-Reset" 'Split Counter always shows Current Split Push C to return to Running Time Memory Review (before Resetting) L-Review* (Bottom shows AVE LAP Split, Top shows TOTAL ELAPSED TIME) L-Review(Shows last DUAL Split) L-Review(Shows next DUAL Split, in reverse order) '(Reviews at any time in reverse numerical order. Hold down for Rapid Review.) STOPWATCH AND SPEED/RATE (Rate=Units/time) Speed/Rate Function Setting S1(2sec) Enter Turbo (Speed/Rate) Set Function or S1 (4sec)- Enters & Reset fields to zero (as for DUAL SPLIT timing) 52-Select Select field* to be Set 53-Set Set field to Desired Setting 54-Exit Exit Setting Function ’Digit is Distance or Sample Count for Speed or Rate Computation-/ Hr(P-HR) & /Min(P-Mn). Computes in “per Hour“ or "per Minute" rate Note: Computes in "per Sec" rate if the Distance or Sample Count (Strokes, Strides, Units, etc.) is divided by 60, then entered. (Since the "input" is divided by 60, so is the output.) Speed/Rate Function Operation R-Start (Show...

Herunterladen

Geben Sie zwei Ziffern: