Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Denon Dateigröße: 731.3 kb Dateiname: 3700825b-f210-4bb6-9d31-30f0bee64242.pdf Unterrichtssprache:

5 ENGLISH ENGLISH ENGLISH Connections Digital connections NOTE: • Do not plug in the power supply • When making connections, also • Be sure to connect the left and right • Making connections with the power • Bunching the power supply cords and connection Cable indications B C OPTICAL IN COAXIAL IN CD recorder etc. Connect using the connection cables shown below. Signal directionAudio cable Analog connections (Stereo) A R L R L Pin-plug cable Digital connections (Optical) C Optical fiber cable Audio signal OUT IN (White) (Red) (Orange) Digital connections (Coaxial) B Coaxial cable (75 ./ohms pin-plug cable) Analog connections Use the included pin-plug cable to connect the left (L) and right (R) output terminal (LINE OUT) of the CD Player to the CD, AUX or TAPE PLAY left (L) and right (R) input terminal of the amplifier. • Digital signals are output from optical terminal and coaxial terminal . When connecting the OPTICAL digital output connector transmission cable (commercially available) Protective cap Match the shapes Remove the protective cap, match the shapes then • Store the protective cap in a safe place so as not insert firmly all the way in. to lose it, and use it when not using the terminal. Connecting the power supply cord NOTE: • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Do not unplug the power supply cord while the set is operating. 6 AC outlet AC 120 V, 60 Hz A R L AUDIO IN R L R L Stereo amplifier ENGLISH 7 ENGLISH ENGLISH Operation Opening and closing the drawer and loading a disc 3 2 [NUMBER] (0~9, +10) [DISC SELECT] [9] 1 [8] 5 DISC SKIP 5 DISC SKIP 2 1 <7/9> <8/6> 3 About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit Operation Press 5. • Make sure the drawer is completely open. Hold the disc by the edges and place it on the disc tray. (Do not touch the signal surface, i.e., the glossy side.) 1 Set the disc properly in the tray according to its size. • Set 8 cm discs in the center hole. • Set 12 cm discs in the outer hole. 2 Press DISC SKIP. The carousel turns and a disc can be loaded in the another disc tray. When the drawer is opened during the play mode, it is possible to load and unload discs in all of the disc trays other than the one whose disc is currently playing. 3 4 Press 5 again. NOTE: • The player will not operate properly and the disc may even be damaged if it is not set correctly. • If your finger should get caught in the drawer when it closes, press 5. • Do not place any foreign objects on the disc tray, and do not place more than one disc on the tray at a time. Otherwise malfunction may occur. • Do not push in the disc tray manually when the power is off as this may cause malfunction and damage the CD player. • Do not touch the carousel while it is turning. Also, do not turn the carousel by hand when it is stopped. Doing so could damage it. • Do not insert disc where indicated by arrow. This could damage the internal mechanism in the unit. LABEL SIDE UP WARD Turning the power on Press . • When a disc is loaded, playback starts automatically. • If no disc is loaded “0 000 00:00” is displayed. .To turn off the power: Press again. NOTE: • To turn off the power while a disc is playing, be sure to press 2 to stop playback before turning off the power. ENGLISH ENGLISH n Operation Starting playback Various playback To pause playback Playing the desired [Direct play] Use this function to and later resume Press 1. playback from that point. • The drawer closes and the • Playback starts. Press 3 during playback. If 5 is pressed while a disc is playing, • Playback pauses. Press [DISC SELECT] . drawer opens and four discs can be 1 be replaced switches when DISC SKIP is pressed. Playback stops automatically after the last . To resume playback: Use [NUMBER] (1 to 5) to select the disc. Press 1. been played. 2 To stop playback Press 2 during playback. • Playback stops. 3 3 Use [NUMBER] (0 ~ 9, +10) to select the track. Example: To play the 4th track on the 3rd disc: Press [DISC SELECT] [3] [4] . Example: To play the 12th track on the 5th disc: Press [DISC SELECT] [5] [+10] [2] . 4 4 Playback begins from the number of the disc and track selected. To move to the next disc during playback 1 1 Press DISC SKIP. The carousel in the drawer turns and the disc on the next tray is played. 1st disc 2nd disc 3rd disc 5th disc 4th disc • When [DISC SKIP–] on the remote control unit is pressed, the carousel turns in the opposite direction and the previous disc is played. Automatic search . Moving ahead to the beginning of the next track (file): Press [ 9] or < 7/9> during playback. • The pickup will advance to the beginning of the next track and playback will continue. Pressing the button several times will forward the pickup the corresponding number tracks. Normal playback resumes when you release your fi...

Herunterladen

Geben Sie zwei Ziffern: