Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
I encourage you to visit our website (to register your product for its warranty and learn more about the complete line of Califone portable audio equipment, headphones, computer peripheral and language learning materials. Sincerely, Roscoe Anthony President, Califone® International, Inc. Warranty Registration Please visit to register your Performer Plus™ Media Player for warranty coverage. This media player is built to the same standards as the rest of our products which teachers rely on day in and day out. Califone warrants this player to be free from defective material and workmanship for one year from the purchase date. Our “Project Intercept” Customer Satisfaction program will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use, provided the unit is returned to our factory via prepaid transportation only after the factory issues an RA (Return Authorization) number which must be clearly written on the outside of the box. Unpacking your Performer Plus™ Inspection and inventory of your system. Check unit carefully for damage that may have occurred during transit. Each DVD110 product is carefully inspected at the factory and packed in a special carton for safe transport. All Damage Claims Must Be Made With The Freight Carrier Notify the freight carrier immediately if you observe any damage the shipping carton or product. Repack the unit in the carton and await inspection by the carrier’s claim agent. Notify your dealer of the pending freight claim. Returning your unit for service or repairs Should your unit require service, contact your dealer or our Customer Service Department at (800) 722-0500 to obtain a Return Authorization (RA) number. All shipments to Califone must include an RA number on the carton and must shipped prepaid. C.O.D. shipments will be refused and returned at your cost. Contents a) Performer Plus™ b) RC-2300 Remote Control c) This Instruction Manual d) Project Intercept Tag 1 AC Line Operation 1. The power cord is located at the rear of the unit. Release the cord retainer tab and uncoil the cord. 2. Plug the cord into a standard 120 volt 50-60 Hz AC outlet. Be sure the plug blades are fully inserted. THE UNIT IS ON WHEN PLUGGED IN. Battery Operation 1. The battery compartment is located at the rear of the unit. Push the lever at the center of the door toward the rear of the unit, then lift the door free. 2. Eight “D” size batteries are required. Refer to the orientation diagram shown inside the battery compartment when installing. Place the batteries on top of the nylon ribbon to help “pop” out the old batteries when you need to replace them. 3. Replace the battery cover. IMPORTANT: Remove all batteries from your cassette unit if it will not be used for an extended period of time. DO NOT USE RECHARGEABLE BATTERIES AND DO NOT LEAVE DISCHARGED BATTERIES IN THE BATTERY COMPARTMENT. NOTE: Califone cassette player/recorders are designed for use only with 60 minute Type 1 Normal Bias recording tape. 2 13 27 12 26 25 29 34 32 31 30 28 49 33 43 45 37 46 39 41 36 35 42 44 48 47 40 Visit us online at califone.com 3 VOLUMETREBLEBASSPOWERPHONESMICC. MICBALANCEDUBBING SPEEDCD SPEEDSPEED+ LRSPEED NORSPEED- TUNER•PAUSEMONOPLAY/STEREO/ TUNER•STOPPRESET/ REPEATRANDOMPLAY TIMEPROGRAMOFFON2XNORMAL1114236201714192223181516249107821TAPE PITCH5 1. Headphone Jack, 3.5 mm 2. Microphone Jack, 3.5 mm 3. Internal Condensor Mic 4. Power Switch 5. Balance Control 6. Tape Pitch 7. CD Speed: +, Normal, - (15%) 8. Volume Control 9. Treble Control 10. Bass Control 11. Dubbing Speed, Normal, 2X 12. CD Compartment 13. Carrying Handle 14. Random Play 15. Play Time 16. Program 17. Tuner Up 18. Tuner Down 19. Stereo/Mono 20. Play/Pause 21. Stop 22. Skip/Scan Forward 23. Skip/Scan Back 24. Preset/Repeat 25. Power On/Standby Switch 26. CD 27. Tape 28. Tuner, AM/FM/FM Stereo 29. Line In 30. LCD Display 31. 2X Tape Counter 32. Remote Control Sensor 33. Tape Deck 1, Record/Play 34. Tape Deck 2, Play 35. Beat Cut Switch 36. Line In Jacks, R/L Channels 37. Cord Wrap 38. Battery Compartment 39. Right Channel Speaker Jack 40. Left Channel Speaker Jack 41. Line Out Jacks, R/L Channels 42. AC Power Cord 43. Telescopic Antenna 44. Headphone Jacks (Five 1/4”) 45. Voice-Over Mic Jack 46. Voice-Over Mic Volume 47. Wireless Receiver Input Jack 48. Headphone/External Speaker Jack 49. Remote Control 4 Getting Started The LED display will be in red (for standby mode) when the ‘Power’ button is pushed. Pushing the LED will cause the LED to be green indicating the unit is fully powered up. • Depressing the ‘Tape’ button will cause the LCD display to show ‘Tape’. • Depressing the ‘AM/FM’ button will cause the LCD display to show ‘AM’ or ‘FM’. • Depressing the ‘CD’ button will cause the LCD display to show ‘Disc’. Digital Volume Control • The volume control is preset to automatically turn on at volume level “26” upon power up. Pre...