Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Recording From CDs
When tracks, which aren’t numerically consecutive on
3 Press EDIT/TIME FADE to have the player create
the disc, are programmed consecutively (i.e. 1, 3, 5
the programme.
etc.)
The display shows the tracks to be recorded. “B” in
A one-second access time blank is added between the
the
B
indication flashes in the display.
tracks.
4 When you record on both sides of the tape, press
You can automatically insert a blank space of 3
EDIT/TIME FADE again.
seconds between each track
The player inserts a pause, then creates the
Use the Auto Space function (see page 14).
programme for side B. The display shows the
programmed tracks.
When you record on one side of the tape or on a
Recording a CD by Specifying
DAT or MD, skip this step.
Tape Length (Time Edit/Just
5 Start recording on the deck and then press · on
Edit)
the player.
When you record on both sides of the tape, the
You can have the player create a programme that will
player pauses at the end of the programme for side
fit the length of the tape. Select one of the following
A.
options:
6 When you record on side B, reverse the tape and
• Time Edit: automatically creates a programme,
press · or P on the player to resume playing.
keeping the original order of the disc.
• Just Edit: automatically arranges the track order to fit
the tape length.
To cancel Time Edit/Just Edit
The programme can contain up to 24 tracks (a pause
Press PLAY MODE repeatedly until “SHUFFLE” and
inserted between tracks is counted as one track).
“PROGRAM” disappear from the display. When using the
Note that tracks whose numbers are over 24 cannot be
remote, press CONTINUE.
programmed automatically.
You can programme the tracks you want in advance
Select the tracks before doing the above procedure. The
player creates a programme from the remaining tracks.
In this case, you cannot select “HALF” to specify the tape
length.
EDIT/TIME FADE
0
/
)
·
You can freely specify the tape length
Set the tape length using AMS ±.
1 Press EDIT/TIME FADE before you start playing
Example: When the tape length of one side is 30 minutes
as follows:
and 15 seconds
• To select Time Edit, press the button until
1 To set the minutes, turn AMS ± until
A
“30” appears in the display, then press
“EDIT” appears and “A” in the
indication
ENTER.
flashes in the display.
2 To set the seconds, turn AMS ± until
• To select Just Edit, press the button until “JUST
A
“15” appears in the display, then press
EDIT” appears and “A” in the
indication
ENTER.
flashes in the display.
When tracks, which aren’t numerically consecutive on
2 Press 0 or ) to specify the tape length.
the disc, are programmed consecutively (i.e. 1, 3, 5
Each time you press these buttons, the display
etc.)
changes as shown below, with the tape length of
A one-second access time blank is added between the
one side following each indication.
tracks.
n HALF ˜ C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N
(23.00)
(27.00)
(30.00)
(37.00)
(45.00)
You can automatically insert a blank space of 3
seconds between each track
When you select “HALF”
Use the Auto Space function (see page 14).
The player sets the programme of each side to a half of
the total playing time of the disc. Note that you cannot
select “HALF” when the disc has more than 24 tracks.
12EN
...