Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• The program remains even after Program Play ends. When you press H, you can play the same program again. • To check the total number of the programmed tracks, press TIME while the unit is stopped. Notes • You cannot create a program containing tracks from both DECK A and DECK B. • “Step Full!” appears in the display when you program over 25 steps. Erase the unnecessary tracks to enter other tracks. • The program is erased when you turn the unit off. • If the total time of the program exceeds 99 minutes 59 seconds, “--.--” appears in the display. • You cannot change the PLAY MODE during playback. • If you program an MP3 track, “--.--” appears in the display. (The total playing time does not appear for MP3 files.) Basic Operations Recording/Editing Before Recording Recording/Editing Before Recording About recordable discs •A recordable disc is an audio CD-R or Audio CDRW with the following logo. • Audio CD-Rs are recordable only one time. Audio CD-RWs are recordable for multiple times. See page 7 for details. About finalization • Finalization is a final editing process that allows recorded CD-Rs and CD-RWs to be played in other players. • Once a CD-R has been finalized, the recorded material cannot be changed. The recorded material on a CD-RW can be altered even after finalizing it. See page 29 for details. • Unfinalized discs can only be played back on DECK B of this unit. See page 7 for details. About the Serial Copy Management System • The Serial Copy Management System allows you to make only a single copy of a digitally recorded source. This unit conforms to the Serial Copy Management System. • You cannot perform a digital recording from a digitally recorded CD-R or CD-RW. In this case, make analog recording. About recording MP3 files • MP3 files are converted to audio CD format before being recorded to the disc. Thus the amount of data may increase too much to record on a single disc. • As this unit recognizes the copyright information for MP3 files, there are following restrictions. – You can perform only Normal speed Synchro- Recording. You cannot make a manual recording. – The digital data is converted to analog data, then recorded. You cannot make direct digital recordings. – You cannot adjust the recording level. • The minimum length of CD-DA is 4 seconds. Therefore, the number of tracks made by the Synchro-Recording may differ from the original disc. • When recording from DECK A to DECK B, the play and record times shown in the display may be different. This does not affect the recording. Automatic conversion of digital sampling rates A built-in sampling rate converter automatically converts the sampling frequency of various digital sources to the 44.1 kHz sampling rate. This allows you to monitor and record sources such as 32 kHz or 48 kHz DAT tape or satellite broadcasts. Types of Recording The following types of recordings are possible, depending on the audio source. For details on each operation, see the reference pages. Automatic Finalization Additional Recording CD-TEXT CopyRecording Level When recording from DECK A Make-Disc SynchroRecording* 1 (Make Disc On) Record all tracks on the selected disc in the original order. High-Speed SynchroRecording* 2 (page 23) Record in high-speed. You cannot hear the sound while recording. a ..3 a Normal speed Synchro- Recording (page 24) Record in normal speed while Same as monitoring the sound. original Synchro-Recording (Make Disc Off) Record from one disc (or several discs for RCDW500C) in the order you want. You can also record in programmed order. High-Speed SynchroRecording* 2 . a . Normal speed Synchro- Recording Manual Recording (page 25) Record by selecting or editing the tracks manually. . a . Adjustable with menu operation When recording from the component connected to the DIGITAL OPTICAL IN jack Manual Recording (page 25) . a . Adjustable with menu operation When recording from the component connected to the ANALOG IN jack Manual Recording (page 25) . a . Adjustable with REC LEVEL Recording/Editing *1 Set “Make Disc” in the Setup Menu to “On” beforehand (page 35). *2 Even if you select High-Speed Synchro-Recording, the recording speed automatically changes to normal speed in the following cases. – When the disc contains Serial Copy Management System information. – When the play mode of DECK A is “PGM”. – When the disc in DECK A contains MP3 files. *3 Be sure to use a blank disc (that has not been recorded). continued Tips • To play the recorded CD on DECK A or another CD player, perform finalization (page 29). • To record your favorite tracks from the CDs in DECK A, make a program (page 19). • If the track marks are not marked properly while making an analog recording from an external component, see page 28. • To record from several discs, see page 25. Notes on recording • You cannot record over existing material. The unit automatically starts recording from the end of any existing material. • Make sure that the remaining recordable time on t...
Dieses Handbuch ist für folgende Modelle:CD-Player - RCD-W100 (683.48 kb)