Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
1 Press EX-CHANGE. The disc tray opens and two disc compartments appear. Even if the player is playing a disc, it doesn’t stop playing. 2 Replace discs in the compartments with new ones. The player plays the disc on the left side compartment after the current disc, and then the one on the right side compartment. 3 Press DISC SKIP. The disc tray turns and other two disc compartments appear. 4 Replace discs in the compartments with new ones. 5 Press EX-CHANGE. The disc tray closes. While the disc tray is open by pressing the EX-CHANGE button • If the playback of the current disc ends, the player stops playing. If the disc is played in 1 DISC Repeat Play mode (see page 8), the current disc starts playing again. • In ALL DISCS Shuffle Play mode (see page 8), tracks are reshuffled on the current disc. • In Programme Play mode (see page 11), only the tracks on the current disc are played. • Do not push the disc tray to close it in Step 5, as you may damage the player. Programming the CD tracks Programming the CD tracks 1 Press PLAY MODE repeatedly until “PROGRAM” appears in the display before you start playing. If a programme is already stored, the last step of the programme appears in the display. When you want to erase the whole programme, hold down CLEAR until “ALL CLr” appears in the display (see page 12). 2 Press DISC 1 – 5 to select the disc. “AL” in the display stands for “all” tracks. When you want to programme the whole disc as one step, skip Step 3, and go to Step 4. 3 Turn lAMSL until the track you want appears and push lAMSL to select the track. The track number that you programmed, the playing order, and the total playing time appear in the display. If you’ve made a mistake Press CLEAR, then repeat Step 2. 4 To programme other discs or tracks, do the following: To programme Repeat Step(s) Other discs 2 Other tracks on the 3 same disc Other tracks on 2 and 3 other discs 5 Press H to start Programme Play. To cancel Programme Play Press PLAY MODE. Tips • You can create your programme while checking the disc labels. While the disc tray is open, follow Steps 1 to 4 with pressing the DISC SKIP button to check the disc labels. If you close the disc tray before Step 5, the total playing time appears in the display after a while. Note that, if the programmed track number isn’t found on the disc, that step is automatically erased. • The programme remains even after the Programme Play ends. When you press the H button, you can play the same programme again. • The programme remains until you erase it or turn off the player. If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren’t found in the player or on the disc are deleted from the programme, and the rest of the programme is played in the programmed order. • For the recording to the A side or B side of the cassette tape, you can pause Programme Play. Note The total playing time doesn’t appear when: — You have programmed a track whose number exceeds 20. — The total playing time of the programme exceeds 200 minutes. Checking the track order You can check your programme before or after you start playing. Press CHECK. Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and “AL” indication) of each step in the programmed order. After the last step in the programme, the display shows “End” and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps. Playing CDs continued Recording From CDs Recording From CDs Changing the track order You can change your programme before you start playing. To You need to Erase a track Press CHECK until the track you don’t want appears in the display, then press CLEAR. Erase the last track Press CLEAR. Each time you in the programme press the button, the last track will be cleared. Add tracks to the Follow Steps 2 through 4 of the end of the programming procedure. programme Change the whole Hold down CLEAR until “ALL programme CLr” appears in the display. completely Create a new programme following the programming procedure. Fading In or Out You can manually fade in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. To Press FADER Start play fading in During pause. “FADE” flashes. The play fades in. End play fading out When you want to start fading out. “FADE” flashes. Then play fades out and the player pauses. Fading time lasts for 5 seconds. Recording a CD by Specifying Tape Length (Time Edit) You can have the player create a programme that will fit the length of the tape. The player automatically creates a programme, keeping the original order of the disc. The programme can contain up to 32 steps (a pause inserted between steps is counted as one step). Note that tracks numbered over 20 ...
Dieses Handbuch ist für folgende Modelle:CD-Player - CDP-CE275 (157.78 kb)