Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Option 2: Battery power Caution • Batteries contain chemical substances, so they should be disposed of properly. Note • Batteries are not supplied with the accessories. 1 Open the batter y compar tment. 2 Inser t 6 batteries (type: R-20, UM-1 or D-cells) with correct polarity (+/-) as indicated. 7 EN EN 8 3 Close the battery compartment. Turn on Press . »»The unit switches to the last selected source. Tip •• To select a source, press SOURCE repeatedly or the source selection buttons on the remote control. Turn off Press again. »»The backlight on the display panel turns off. 4 Play Play CD 1 Press CD to select the disc source. 2 Press OPEN•CLOSE to open the disc tray. 3 Insert a disc with the printed side facing up, then close the disc tray. »» Play starts automatically. Play from USB devices Note •• Make sure that the USB device contains playable audio content. 1 Press USB to select USB source. 2 Insert the USB device into the socket. »» Play starts automatically. If not, press . 9 EN Play from an external device You can also listen to an external audio device such as an MP3 player through this unit. 1 Press SOURCE repeatedly to select [AUDIO-IN] source. 2 Connect an audio cable (3.5mm, not supplied) to: • the AUDIO-IN socket on the unit. • the headphone socket on an external device. 3 Play the external device (see the device's user manual). Play tape Note •• When you play a tape, the sound source cannot be changed. 1 Press SOURCE to select the tape source. 2 Press to open the tape door. 3 Load a tape with the open side upward. 4 Press to start play. • To pause or resume play, press . • To rewind or fast-forward, press / . • To stop play, press . 5 Play options Control play In CD or USB mode, you can control play through the following operations. / Press and hold to fast-forward or fast-reverse the track during playback, then release to resume play. / Skip to the previous or next MP3/ WMA album. Star t or pause play. / Select an audio file. Stop play. REPEAT [ ]: Play the current track repeatedly. [ ]: Play all tracks repeatedly. [ ]: Repeat all tracks randomly. To return to normal play, press REPEAT repeatedly until the repeat icons disappear. SHUFFLE [ ]: Play tracks randomly. To return to normal play, press SHUFFLE repeatedly until the shuffle icon disappear. Tip • Only [ ] and [ ] can be selected when you play the programmed tracks. Program tracks In CD or USB mode, you can program a maximum of 20 tracks. 1 Press to stop playback. 2 Press PROG to activate the program mode. » [PROG] (program) begin to blink. 3 For MP3/WMA tracks, press ALBUM/ PRESET +/- to select an album. 4 Press / to select a track number, then press PROG to confirm. 5 Repeat steps 3-4 to program more tracks. 6 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. • To erase the program, press twice. Adjust sound During play, you can adjust volume and select the sound effects. Key VOL +/-Increase or decrease volume. Function MUTE Mute or resume sound. DBB Turn dynamic bass enhancement on or off. DSC Select a preset sound effect: ROCK (rock); CLASSIC (classic); POP (pop); JAZZ (jazz) EN 10 6 Listen to FM radio Tune to FM radio stations Note • For optimal reception, fully extend and adjust the position of the FM antenna. • The icon indicates stereo broadcast is available for this radio station. 1 Press TUNER to select FM radio. 2 Press and hold / for 2 seconds. » [SEARCH] (search) is displayed. » The unit tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a radio station with weak signal: Press / repeatedly until you find better reception. Store radio stations automatically Note • You can program a maximum of 30 FM radio stations. In tuner mode, press and hold PROG for 2 seconds. » [AUTO STORE] (auto store) is displayed. » The unit stores all the available FM radio stations. » The first stored radio station is broadcast automatically. Store radio stations manually Note • You can program a maximum of 30 FM radio stations. 1 Tune to an FM radio station. 2 Press PROG to activate the storing mode. » [PROG] (program) blinks on the display. 3 Press to allocate a number (1 to 30) to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to store other stations. Note • To remove a pre-stored FM radio station, store another station in its place. Select a preset radio station In FM tuner mode, press to select a preset number. 11 EN 7 Other features Set the sleep timer This unit can switch to standby automatically after a preset period. • When the unit is turned on, press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, appears. To deactivate sleep timer: • Press SLEEP repeatedly until [SLEEP OFF] (sleep off) is displayed. » When the sleep timer is deactivated, disappears. Turn screen backlight on/off Press and hold BACK...