Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
2. When you recognize the passage you want, release . or §. =Normal playback continues. Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory. 1. In the stop position, press . or § once or repeatedly to select your desired track number. MP3-CD/WMA only: • First press ALBUM/ PRESET – or + once or more to find your album. 2. Press PROGRAM. ™ and the number of tracks stored appear briefly. (See 5) ™ Display shows: PROG and the selected track number. (See 6) 3. Repeat steps 1-2 to select and store all desired tracks. 4. To start playback of your disc program, press 2;. Helpful Hints: – During normal playback, you can press PROGRAM to add a current track to your program list. – appears if you press PROGRAM and there is no track selected. – appears if you try to store more than 20 tracks. Reviewing the program • In the stop position, press and hold down PROGRAM for a while until the display shows all your stored track numbers in sequence. Helpful Hints: – Display shows : if there is no track programmed. MP3-CD/CD PLAYER Clearing a program You can erase the contents of the memory by: •Press 9 : – Once, if in the stop position; – Twice, during playback. •Press STANDBY ON y; • Select another sound source; • open the CD door = displayed briefly, and program disappears. Different play modes: SHUFFLE and REPEAT (See 7 -8) You can select and change the various play modes before or during playback. The play modes can be combined with PROGRAM. shuffle - tracks of the entire CD/ program are played in random order shuffle repeat all - to repeat the entire CD/ program continuously in random order repeat all - repeats the entire CD/ program repeat - plays the current track continuously 1. To select play mode, press MODE once or more. (SHUFFLE / REPEAT on the remote control). 2. Press 2; to start playback if in the stop position. • If you have selected shuffle, playback starts automatically. 3. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. – You can also press the 9 to cancel your play mode in playing. AUX / CASSETTE RECORDER AUX (audio cable not included) .(See 9) This 3.5mm socket allows you to connect other audio equipment to your system. 1. Press y to on, then the source selector to select AUX. = Display shows: AUX and PHILIPS scrolls 2. Use an audio cable to connect the AUX socket to the LINE OUT/headphone socket on your external equipment. 3. To avoid noise distortion, turn down the volume on your external equipment. 4. To adjust the sound and volume, use the sound controls on your external equipment and the AZ3068. Cassette recorder Cassette playback 1. Press y to on, then the source selector to select TAPE. = Display shows throughout tape operation. 2. Insert a cassette and close the door. 3. Press PLAY 1 to start playback. 4. To pause, press PAUSE ;;. Press PAUSE ; again to resume. 5. Press SEARCH 5/6 to fast wind the tape. 6. To stop the tape, press STOP•OPEN 9/ . Helpful Hints: -During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE mode ; has been activated.) -During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released. CASSETTE RECORDER GENERAL INFORMATION ON RECORDING • Recording is permissible insofar as copyright or. other rights of third parties are not infringed. • For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. • The best recording level is set automatically. Altering the VOLUME or BASS controls will not affect the recording. •To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. Recording from the CD Player 1 Select CD source. 2 Insert a CD and if desired, program track num bers. 3 Press STOP•OPEN 9// to open the cassette holder. Insert a blank tape and close the deck. 4 Press RECORD 0 to start recording. 5 Press 2; to start CD playback. 6 For brief interruptions press PAUSE ;. To resume recording, press PAUSE ; again. 7 To stop recording, press STOP•OPEN 9//. Recording from the Radio 1 Tune to the desired radio station (see Tuning to radio stations). 2 Follow steps 3-7, under CD Synchro Start recording. MAINTENANCE & SAFETY • Do not expose the set, batteries, CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. • The apparatus shall not be exposed to dripping or splashing. • Adequate ventilation with a minimum gap of 6 inches between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up. • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curt...