Stimmen - 4, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
* To repeat only the desired tracks (Player A only) 1Program the desired tracks by performing steps 1 to 3 of “Programming tracks in desired order”. . 2Switch REPEAT ON. 3Start playback. To repeat one selected disc 3Start playback. Within 8 seconds! 2Select the disc number. 4Switch REPEAT ON. 1Check that the Player is in the normal play TRACK mode. ) E REPEAT ENTER 6 DISC SKIP DOWN UP ENTER 6 E REPEAT Previous disc Next disc OUp to 32 tracks can be programmed by repeating steps 1. REPEAT ON OThe current status is displayed when the button is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa). OAll of the programmed tracks will be repeated. OIf a track to be played is located in the disc played on Player B, that track will be skipped. OIn case only one track is programmed, only that track will be repeated. To cancel repeated playback Press the REPEAT button twice. (REPEAT ON ® OFF) OThe disc number can be selected directly by using the DISC SELECTOR and numeric buttons in place of the DISC SKIP (DOWN/UP) buttons. OIf the selected disc is being played on the other Player, blinking “DISCXXX BUSY!” is displayed and the disc will not be played. REPEAT ON OThe current status is displayed when the button is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa). OThe operation is not available during the continuous play mode. To cancel repeated playback Press the REPEAT button twice. (REPEAT ON ® OFF) For random repetition . For music type or user file repetition . For best selection repetition . Playback in a random order (RANDOM mode) Use the following procedure to activate random playback which selects a track at random after every track. This feature may allow you to play CDs for long hours without getting tired of. Chapter 3 Preparation OSelect the Player A or Player B. * 1Check that the Player is in the normal play TRACK mode. ) 2Select discs. To select one disc 2Start playback. Within 8 seconds! 1Select the disc number. 3Select “ONE DISC RANDOM”. To select all discs Select “ALL DISC RANDOM”. OThe disc number can be selected directly by using the DISC SELECTOR and numeric buttons in place of the DISC SKIP (DOWN/UP) buttons. To select another track in the middle of playing one To cancel random playback or Select “RANDOM OFF”. DISC SKIP DOWN UP ENTER 6 RANDOM F RANDOM F CHARACTER 4 . DOWN UP 7 RANDOM F For repeated playback Press the REPEAT button to select “REPEAT ON”. For continuous playback (ALL DISC RANDOM only) Press the CONTINUOUS PLAY button. ><<><<10>2><> Each press switches the modes as follows: 1ONE DISC RANDOM 2ALL DISC RANDOM 3RANDOM OFF The number here changes. OEach time a track ends, the same operation as above is repeated, and the track selected next is played. ORandom play stops after all of the tunes have been played once. OIf the selected disc is being played on the other Player, blinking “DISCXXX BUSY!“ is displayed and the disc will not be played. OIf a track to be played is located in the disc played on the other Player, that track will be skipped. (This track will not be selected later unless the REPEAT mode is set.) RANDOM F Previous disc Next disc The 10-key remote is not capable of controlling Player B. It should be controlled from the keyboard. Be sure to hold the ROOM B button when controlling Player B. O“ONE DISC RANDOM“ cannot be selected during the continuous play mode. OPressing the 4button once returns to the beginning of the track being OPress the 7 button to stop playback. played. ONormal playback will be performed when RANDOM OFF is selected. For random music type or random user file . Programming tracks in desired order (PGM mode)(Player A only) Use the following procedure to select desired tracks (up to 32 tracks) from different discs and program them in the desired order. Chapter 3 SET SET GPMESELTCDSICGP0M12D00GP0M12D00T1--C 1Press so that the “PGM” indicator lights. Preparation OSet the Player A to stop mode. 2Select the disc. OThe disc number can be selected directly by using the DISC SELECTOR and numeric buttons in place of the DISC SKIP (DOWN/UP) buttons. OWhen the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Discs can be selected by the disc title. “Registration of Title” . OIf you make a mistake, press the CLEAR button and enter the disc No. from the beginning. OTo program the entire disc, press the SET button without inputting the track number. “ALL” will be displayed. OWhen the disc corresponds to CD-TEXT, or when the track titles have been registered, the track title is displayed. Tracks can be selected by the track title. “Registration of Title” . OProgram other tracks in the desired order by repeating steps 2 and 3. OUp to 32 tracks can be programmed. “FULL” is displayed when no more tracks can be programmed. OIf you make a mistake, press the CLEAR button...
Dieses Handbuch ist für folgende Modelle:CD-Player - CD-4900M (1 mb)