Login:
Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Anleitung Clarion, modell BD169RG

Hersteller: Clarion
Dateigröße: 1.73 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


During manual mode, if the buttons are not pressed in more than 7 seconds, tuning mode return to seek tuning automatically. Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. 1. Press the [BND ] button and select the desired band (FM or AM (MW/LW)). 2. Press the corresponding [DIRECT ] button to recall the stored station. . Press and hold one of the [DIRECT ] buttons for 2 seconds or longer to store that station into preset memory. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the [DIRECT ] buttons for 2 seconds or longer to store the current station into preset memory. Auto store 1. Press the [BND ] button and select the desired band (FM or AM (MW/LW)). 2. Press and hold the [P/A ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. . If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Preset scan 1. Press the [P/A ] button. 2. When a desired station is tuned in, press the [P/A ] button again to continue receiving that station. Note: • Be careful not to press and hold the [P/A] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. RDS Operations RDS (Radio Data System) This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. When using the RDS function, always set the radio to FM mode. AF (Alternative Frequency) function The AF function switches to a different frequency on the same network in order to maintain optimum reception. . The factory default setting is “ON ”. Switching ON/OFF the AF function 1. Press the [AF ] button to turn on/off the AF function. . If the reception of the current broadcast station deteriorates, “SEARCH ” appears in the display and the radio searches for the same programme on another frequency. DB168R/BD169R/BD169RG 7 English RDS Operations English REG (Regional programme) function When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received. Notes: • This function is disabled when a national station such as BBC R2 is being received. • The REG function ON/OFF setting is valid when the AF function is ON. Switching the REG function ON/OFF 1. Press and hold the [AF] button for 1 second or longer to turn on/off the REG function. Manually tuning a regional station in the same network 1. This function is valid when the AF function is ON and the REG function is OFF. Note: • This function can be used when a regional broadcast of the same network is received. 2. Press any one of the [DIRECT] buttons to call out the regional station. 3. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network. TA (Traffic Announcement) function Setting the TA standby mode If you press the [TA] button when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Cancelling the TA standby mode With “TP” and “TA” lit in the display, press the [TA] button. The “TA” in the display goes off and the TA standby mode is cancelled. . If “TP” is not lit, pressing the [TA] button searches for a TP station. Searching for a TP station When “TP” is not lit, if you press the [TA] button, “TA” in the display lights and the unit automatically receives a TP station. Auto store function for TP stations With “TA” lit in the display, press and hold the [P/A] button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory. . Even if you select F1 (FM1) or F2 (FM2), a TP station is stored into memory for F3 (FM3). PTY (Programme Type) function This function enables you to listen to a broadcast of the selected programme type when it starts even if the unit is on a function mode other than radio. . Some countries do not yet have PTY broadcast. Setting the PTY standby mode When you press the [PTY] button, the PTY standby mode is turned on. The PTY item name appears in the display. Cancelling the PTY standby mode When you press and hold the [PTY] button for 1 second or longer, the PTY standby mode is cancelled. Cancelling a PTY interrupt broadcast Press the [PTY] button during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode. Selecting PTY...

Dieses Handbuch ist für folgende Modelle:
CD-Player - BD169R (1.73 mb)
CD-Player - DB168R (1.73 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien