Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Available categories vary according to broadcasting hours. The unit does not display categories with no broadcasting XM channel. • Each XM channel may belong to two categories (Category 1 and Category 2). Both categories are used for channel selection by category. Memory presetMemory preset Channel presettingChannel presetting Channel presets allow you to quickly and conveniently select your favorite XM channels. Up to 15 XM channels can be stored as channel presets. Press [PLAY MODE] to select “MANUAL”. 1 Press [4, REW/ ] or [., /FF] or numeric 2 buttons to select a channel. Press [PROGRAM]. 3 Press the numeric buttons to select a channel. 4 The station occupying a channel is erased if another station is preset to that channel. Repeat steps 2 to 4 to preset more stations. 5 Note: • You can only preset XM stations which you can receive. • XM channel 0 (RADIO ID) cannot be stored as a channel preset. The display mode setting can be changed to display information about the broadcast content such as the category, song title or artist’s name. Press [DISPLAY] repeatedly to display: Example: Channel number Channel name Category name Title Artist Note: • If there is no text information for the current XM broadcast, “– – –” is displayed. • For text information more than 8 characters long (Title or Artist only), after the text has scrolled, press [DISPLAY] to scroll the text again. Press [DISPLAY] while the text is scrolling to change the display mode. The XM name and related logos are registered trademarks of XM Satellite Radio Inc. All rights reserved. Selecting a preset station Press [PLAY MODE] to select “PRESET”. 1 Press [4, REW/ ] or [., /FF] or numeric 2 buttons to select a channel. RQTV0200 13 Timer Timer Setting the clockSetting the clock This is a 12-hour clock. Press [CLOCK/TIMER] to select “CLOCK”. 1 Each time you press the button: CLOCK ° PLAY ° REC Original display 2 ( Within 8 seconds or so ) Press [4, REW/ ] or [., /FF] to set the time. Press [CLOCK/TIMER] to finish setting the time. 3 Displaying the clock Press [CLOCK/TIMER] once when the unit is on or in standby mode. The time is displayed for a few seconds. Note: Reset the clock regularly to maintain accuracy. Using the play or record timerUsing the play or record timer You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the external equipment (record timer). Play timer and record timer cannot be used together. Turn the unit on and set the clock. Timer Action Play timer Prepare the music source you want to listen to; cassette, disc number (1~5), radio or music port source, and set the volume. Record timer Check the cassette’s erasure prevention tabs (\ page 10), insert the cassette and tune to the radio station (\ page 11~13), select the music port source (\ page 15) or iPod (\ page 16). Press [CLOCK/TIMER] to select the timer function 1 Each time you press the button: CLOCK ° PLAY ° REC Original display °PLAY : to set the play timer °REC : to set the record timer (Proceed to the next step within 8 seconds ) Press [4, REW/ ] or [., / FF ] to set the 2 starting time. Start time Play timer indicator Record timer indicator Press [CLOCK/TIMER] to confirm. 3 Repeat steps 2 to 3 to set the finishing time. 4 1Finish time To activate the timer Press and hold [–°PLAY/REC] to turn on your desired 5 timer. ° PLAY ° REC no display (off) Press [y] to turn off the unit. 6 The unit must be off for the timers to operate. Other basic operationsOther basic operations To Action change the settings Repeat steps 1 to 4 and 6 (\ see left and above). change the source or volume 1) Press and hold [–°PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Perform steps 5 to 6 (\ see above). check the settings Press [CLOCK/TIMER] repeatedly to select °PLAY or °REC. cancel Press and hold [–°PLAY/REC] to clear the timer indicators from the display. If you use the unit after the timers are set After use, check that the correct tape/disc are loaded before turning the unit off. Note: • The play timer will start at the preset time with volume increasing gradually to preset level. • The record timer will start 30 seconds before the set time with the volume muted. • The timer comes on at the set time every day if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • Regardless of the channel selection during timer setting, the XM satellite radio always comes on with the previously selected channel. • If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to play back or record from the portable audio equipment, just activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.) Using the sleep timerUsin...