Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
To program a song sequence: 1. Press STOP first if the CD is playing. 2. Press the PROGRAM button. The CD display will show P:01 3. Press the (SKIP>>) and or (SKIP<<) buttons to select the first track to program. 4. Once the desired track is reached, press the PROGRAM button to enter the track number into memory. 5. Repeat steps 3 & 4 to program additional tracks. 6. Press the PLAY/PAUSE button to start programmed playback. Note: The program will be erased when you press the CD PROGRAM button. Repeat CD Selections Repeat one or all programmed selections using the CD REPEAT button. Push the button once to replay any single selection. Push the button twice to replay all programmed selections (in programmed order). Push the button three times to clear the REPEAT function. “REPEAT ONE” or “REPEAT ALL” will appear on the CD PROGRAM DISPLAY when the CD REPEAT button is pushed. AM/FM Radio Operation The 2385AV-02 and 2395AV-02 feature an AM/FM PLL (phase locked loop) stereo radio and telescopic antenna for local AM and FM stereo reception. To operate the radio: 1. Plug the unit in. 2. Set the FUNCTION selector to Radio. 3. Extend the telescope antenna. 4. Select AM, FM or FM Stereo reception band. 12 TAPE AM/FM CD VOLUME TREBLE BASS POWER PHONES BALANCE TUNER • PAUSE MONO PLAY/ STEREO/ TUNER• STOP PRESET/ REPEAT RANDOM PLAY TIME PROGRAM OFF ON 10 261 32 1914 47 20 21 15 24 25 17 16 23 9 11 12 65 7 8 4 22 Top View 1. Power On 22. Stop 2. Power/Standby Switch 23. Repeat 3. LCD Display 24. Random 4. Tape 25. Play Time 5. AM/FM 26. 3.5 mm Headphone Jack 6. CD 27. 1/4” Headphone Jack 7. Volume Down 28. External Speaker Jacks 8. Volume Up 29. Microphone Jack 9. Treble Up 30. Mic. Remote On/Off Jack 10. Treble Down 31. Remote Sensor 11. Bass Up 32. Balance Control 12. Bass Down 33. Carrying Handle 13. Telescoping Antenna 34 & 35. Stop/Eject 14. Tuner Up 36. Tape Cassette A 15. Tuner Down 37. Tape Cassette B 16. Preset 38 & 39. Play 17. Program 40 & 41. Pause 18. CD Door 42 & 43. Rewind 19. Play/Pause 44 & 45. Fast Forward 20. Skip/Scan Forward 46. Tape Counter 21. Skip/Scan Back 47. Stereo/Mono - FM Mode Only 5 GETTING When the ‘Power’ mode. Pushing the LED • Depressing the ‘Tape’ (4) button will cause the • Depressing the ‘AM/FM’ (5) button • Depressing the ‘CD’ (6) button will DIGITAL VOLUME CONTROL • Press ‘VOL Ў ’ (7) to reduce the volume, the level will be will show ‘00’ on the LCD display. Electronic Volume Control Display VOL 04 Press ‘VOL ^ ’ (8) to increase the volume. Maximum volume is ‘40’ on the LCD display. TREBLE AND BASS CONTROLS ‘TREBLE ^ ’ (9) and ‘TREBLE Ў ’ (10) can be used to adjust the Treble up and down respectively, while ‘BASS ^’ (11) and ‘BASS Ў ’ (12) can be used to adjust the Bass up and down respectively. Both Treble and Bass can be adjusted in the range of +5 to –5. Treble Bass tre+2 ba-1 PLL RADIO FUNCTION • Press ‘AM/FM’ (5) to select the desired reception band. Extend the telescoping antenna (13) for FM. There is a built-in antenna for AM reception. For FM stereo reception the ‘stereo’ will show on the LCD display. AM Band Selection AM 520KHz • Press the ‘TUNER ^ ’ (14) or ‘TUNER Ў ’ (15) button repeatedly until the desired station shows on the LCD display. • To automatically scan through the frequency bands, hold the ‘TUNER’ button down until you see the speed of the LCD display increase. Scanning will stop when a strong signal is detected. 6 Set the FUNCTION TAPE (4) to record AM/FM (5) to record CD (6) to record from 1. Insert a blank tape into cassette 2. Press the PAUSE button then the RECORD RECORD button is pressed the PLAY button will follow. 3. Press PAUSE again to start recording. Dubbing (Recording from Tape B to Tape A) 1. Insert a blank tape into cassette Deck A, and 2. Press the PAUSE button then the RECORD button on Deck RECORD key is pressed the PLAY button will follow. 3. Press the PLAY button on Deck B, the PAUSE button on Deck A will release automatically and recording will begin. Note: Every new cassette tape has erase prevention tabs. Commercially prerecorded tapes have the tabs removed to prevent recording over the original material or accidental erasure. Cover the openings with adhesive tape if you wish to record over such cassette tape. To Stop Recording Press the STOP/EJECT button on Deck B or press the PAUSE key on Deck A to momentarily stop recording. Cueing with the Tape A Counter (46) Rewind the tape to the beginning. Press the RESET button to reset the counter to (000). Use A Counter Display to note precise points on an audio tape during playback and to cue the tape points using the Fast-Forward/Cue or Rewind/Review buttons. Compact Disc Player Operation The 2385AV-02 and the 2395AV-02 Programmable Compact Disc Player plays both 12cm and 8cm CDs, CD-R, CD-RW without requiring an adapter. Up to 20 tracks can be programmed for play. Loading a Compact Disc 1. Lift to open the CD door and see “OPEN” on the LCD display. 2. Place a CD in compartment with label side ...
Dieses Handbuch ist für folgende Modelle:CD-Player - 2385AV-02 (147.99 kb)