Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Blaupunkt Dateigröße: 738.63 kb Dateiname: 9792b30b-297d-4789-b32b-4f9f0745bea3.pdf Unterrichtssprache:

Recalling stored stations You can recall any stored station at the touch of a button. • Select the waveband by pressing FMT or AMT. On FM, also choose the corresponding memory bank by pressing the FMT button as many times until the desired bank appears in the display. • Press the corresponding preset button briefly to recall the station. 15 Switching from stereo to mono FM) If reception is poor, you may get better sound quality by switching to mono: • Press the lo button for approximately two seconds. With mono playback, the stereo Sign OJ will disappear from the display. Each time the radio is switched on, stereo playback is activated. The unit will automatically switch to mono if the received signal is not strong enough for stereo playback. PTY - Program Type PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their program type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off l Press PTY. When the function is active, the program type selected last will briefly appear in the display. “PTY” will be permanently indicated in the lower right corner of the display panel. Program types Use cc>> to have the last selected program type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6. Condition: PTY must be active. All of the program types listed below are available. The letters printed in bold are identical to the actual short-time indication in the dis play. NEWS INFORM SPORTS TALK ROCK CLS ROCK ADLT HIT SOFT RCK TOP 40 COUNTRY OLDIES SOFT NOSTALGA JAZZ CLASSICL R&B SOFT R&B LANGUAGE lf’fhe system is unable to find a station offering the selected program type, the display will show “NO PTY” and a beep tone will be released. The station received before starting seek tuning will be tuned in. Storing program types One program type was assigned to each of the preset buttons l-6 at the factory. If desired, you can also store other available program types. To do so, make sure that “PTY” lights up in the display. • If necessary, press the PTY button to switch on the function. • Select a program type using buttons cc >> and • hold down the desired preset button (l-6) until you hear a beep. Now the selected program type can be recalled by pressing this preset. For this the PTY function must be active. REL MUSC REL TALK PERSNLTY PUBLIC TEST (used for factory testing) PTY 23 to PTY 29 have not been assigned. Checking the program type of the station • Press PTY for approximately two sec onds. After the beep tone the display will show the program type offered by the tuned in station. Displaying the selected program type • Press >. The program type selected last will be displayed briefly. Selecting a program type a) Using the preset buttons When PTY is switched on, you can use the preset buttons l-6 to select the program types stored at the factory. • Press one of the presets 1 - 6. The selected program type will be displayed for two seconds. Scanning stations with PTY-SCAN Condition: “PTY” must appear in the display. • Press the SC button. All received stations offering the selected program type will be scanned. To switch off PTY-SCAN: • Press SC once again. Emergency Alert System Your RDS tuner is also able to automatically receive any RDS emergeny announcements broadcast during extraordinary circumstances. Notice: As earlier mentioned, these functions are currently only supported by a limited number of RDS stations. If you wish to listen to a station with this PTY, • press NV to start seek tuning op eration. If the system is unable to find a station offering the selected program type, the display will show “NO PTY” and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different program types to each preset position. Please refer to the next chapter “Storing program types”. b) Using the cc >> buttons of the rocker switch When PTY is switched on, you can select a program type using buttons << >>. • Press cc or >>; the program type selected last will be displayed for three seconds. • During this period press >> (forwards) or > as many times as required. If you wish to listen to a station offering the selected PTY, • press A/V to start seek tuning operation. Tape operation The car stereo has to be switched on. The unit automatically switches to tape operation when a cassette is inserted. Inserting a tape • Turn on the set. • Insert a tape. The tape will be automatically transported to the playback position. Side A or 1 starts to play. During tape operation, “TR 1” or “TR 2” (track) will show on the display panel. Insert the tape with side A or 1 facing up, the open side showing to the right. Removing a tape l Press C . The cassette will eject. gg;ing cassett...

Herunterladen

Geben Sie zwei Ziffern: