Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Hooking up external speakers alone must behooked up using the EXTERNAL SPEAKERJACKS(33). Specification Frequency Range : AM 525 - 1710 KHz : FM 87.5 - 108.5 MHz Power Supply : AC 120V ~ 60Hz Power Consumption : 18W Speed : 33 /45 /78 RPM Speaker : 3” x 5” 8ohm 5W x2 * DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Repeat Playback CD Operation CD Operation 1 To repeat a single track, choose the track thatyou want to repeat, then press the PLAY/PAUSEBUTTON (7) to start the track. Press the REPEATBUTTON (9) once to repeat this track. The REPEAT INDICATOR (10) will flash. 2 To repeat all tracks, press the PLAY/PAUSEBUTTON (7) to start the CD. Press the REPEATBUTTON (9) twice to repeat all tracks. Oncethe CD ends, it will star over again from thebeginning of the CD. The REPEAT INDICATOR (10) will remain on. 3 To erase the repeat function, press the REPEATBUTTON (9) again until the REPEAT IDICATOR (10) is off. Programmed Playback 1 Press the PROGRAM BUTTON (13). " 01" willshown on the display and the PROGRAMINDICATOR (14) will flash. 2 Press the FORWARD SKIP BUTTON (16) or the BACKWARD SKIP BUTTON (15) to selecta track. 3 Press the PROGRAM BUTTON (13) again to store the selected track number. 4 Repeat steps 2 and 3 above to program othertracks. 5 Press the PLAY/PAUSE BUTTON (7) to startprogrammed playback and the PROGRAMINDICATOR (14) will be on. 6 To erase the programmed sequence, press theSTOP BUTTON (8) twice or until the PROGRAMINDICATOR (14) is off. Programmed tracks willalso erase when the CD DRAWER is opened. NOTE: Maximum of 20 tracks can be programmedto play in any order. 10 General Troubleshooting There is no Power 1 Make sure the radio is plugged in correctly. 2 Check to see that the power button ispushed in. There is no Sound 1 Check the volume level by turning the volumeknob. Turntable will not work 1 Make sure the function switch is set to phono. 2 Make sure the protective needle cover isremoved. CD does not play 1 Check to make sure CD is inserted correctly(label side facing up). 2 Check that the surface of the CD is clean 3 Make sure function switch is set to CD. Turntable is dragging 1 Make sure the Turntable Suspension Screws areturned clockwise all the way in to allow theturntable to sit on the suspension. The Crosley Traveler Stack-O-Matic™ Record Changer is equipped with a needle designed specifically to fit Crosley Stack-O-Matic™ Record Changers. Replacement needles (Model # NS1) are available for purchase through Crosley Radio at 1-866-CROSLEY. The NS1 model is not intended for use with other Crosley reproduction turntables. Thank you for purchasing the Crosley The MusicianEntertainment Center (CR74-S). Before operatingthis unit, please read this manual thoroughly andretain it for future reference. About This Manual Instructions in this manual describe the control functions of the CR74-S. Welcome Table of Contents Getting Started Control Locators....................... 4,5 Unpacking................................. 6 Power Source........................... 6 Basic Operation Turntable Operation.................. 7 Accessory: Adapter for 45 rpm .................................................. 7 Cassette Operation.................. 8 Radio Operation....................... 8 CD Operation Playing a CD............................ 9,10 Programmed Playback............. 10 General Troubleshooting Guide.......... 11 Warranty.............................. 12 Playing A CD Skip Forward And Skip Reverse Search Forward And Reverse During Play 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 15 19 VOLUME TUNING 20 21 1 Control Locators Unit Controls 1 Speakers 2 Tuner Dial 3 Volume Knob 4 Function Switch 5 AM/FM Button 6 Play/Pause Indicator 7 Play/Pause Button 8 Stop Button 9 Repeat Button 10 Repeat Indicator 11 CD Drawer 12 LED Display 13 Program Button 14 Program Indicator 15 Backward Skip Button 16 Forward Skip Button 17 Open/Close Button 18 Power Button 19 Tuning Knob 20 Cassette Eject / Fast Forward 21 Cassette Door 4 9 CD Operation 1 Select the FUNCTION SWITCH (4) to select CD mode. 2 Press the OPEN/CLOSE BUTTON (17) to open the CD DRAWER (11). Place a disc in the tray with the labeled side of the disc facing up. 3 Press the OPEN/CLOSE BUTTON (17) again to close the CD DRAWER (11). The display will show "--" for a few seconds, then the total number of tracks on the disc will be displayed. "00" will be shown when there is no disc inside the unit. 4 Press the PLAY/PAUSE BUTTON (7) to start playback. The PLAY/PAUSE INDICATOR (6) will light up. 5 Adjust the VOLUME KNOB (3) to the desired volume level. 6 To pause playback, press the PLAY/PAUSE BUTTON(7). The PLAY/PAUSE INDICATOR (6) will flash. Press the PLAY/PAUSE BUTTON (7) again to resume playback. 7 To stop playback, press the STOP BUTTON (8) and the PLAY/PAUSE INDICATOR (6) will go off. 1 Press the FORWARD SKIP BUTTON (16) or the BACKWARD SKIP BUTTON (15) to select a track. 2 Press the PLAY/PAUSE BUTTON (7) to start playin...
Dieses Handbuch ist für folgende Modelle:CD-Player - CR74-S (406.09 kb)