Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
With the DX mode activated, both strong and weak stations will be tuned in the Auto-Seek operation. Press again to return to the local mode. The DX indicator will turn off and the SEEK indicator will illuminate for a few seconds. Now, only strong stations will be tuned. 4 Press the g DN or f UP button to automatically seek a station downward or upward respectively. The unit will stop at the next station it finds. Press the same button again to seek the next station. 8-EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press the F button so that the F (Function) indicator light goes out. Then press and hold any one of the preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks. 3 Press the Preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds). The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle (9) and station frequency memorized. 4 Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, MW and LW). NOTE If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. Automatic Memory of Station Presets 1 Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: > F1(FM1) > F2(FM2) > MW > LW 2 Press and hold the A.ME button for at least 2 seconds. The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength. The frequency on the display continues to change while the automatic memory is in progress. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 Press the BAND button repeatedly until the desired band is displayed. Each press changes the band: > F1(FM1) > F2(FM2) > MW > LW 2 Press the F button so that the F (Function) indicator light goes out. Then press the station preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. 9-EN RDS Operations BAND T.INFO g DN f UP SETUP/F Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. 1 Press the F button so that the F (Function) indicator lights up. 2 Press the AF button to activate the RDS mode. 3 Press the g DN or f UP button to tune in the desired RDS station. NOTE When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. 4 Press the AF button again to deactivate the RDS mode. 5 Press the F button to activate the normal mode. The F indicator light goes out. Tips The RDS digital data includes the followings: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement PTY Programme Type EON Enhanced Other Networks AF PTY Recalling Preset RDS Stations 1 Press the F button so that the F (Function) indicator lights up. 2 Press the AF button to activate the RDS mode. 3 Press the F button to activate the normal mode. The F indicator light goes out. 4 Make sure that the F indicator light goes out, then press the preset button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. 5 If the preset station and the stations in the AF list cannot be received: Press the same preset button again within 5 seconds to have the unit search for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district. NOTE For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1 and F2 bands only. 10-EN Receiving RDS Regional (Local) Stations 1 Press and hold the SETUP button for at ...
Dieses Handbuch ist für folgende Modelle:CD-Player - CDM-7859R (580.42 kb)
CD-Player - CDM-7856R (580.42 kb)