Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Alpine Dateigröße: 693.82 kb Dateiname: Unterrichtssprache:

The movable display will close. NOTES • Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. • The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses. • The display will stop at the set angle when closing. CAUTION Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch. Playback 1 Press the c button. The movable display will open. > TUNER > CD > CD CHANGER. (. Only when the CD changer is connected) 3 To pause playback, press the -/J button. Pressing the -/J button again will resume playback. 4 To eject the disc, press the c button. NOTES • Do not insert or remove a CD when loading or ejecting a CD, as malfunction may result. • If the CD does not eject, press c button again for more than 3 seconds with the movable display open. About discs that can be used with the CDA-7995/CDA-7894 models. We recommend using only compact discs containing the marks shown below. You can play CD-Rs (CD-Recordable)/CD-RWs (CD- ReWritable) for audio use on this unit.You can also play CD-Rs/CD-RWs containing MP3 formatted audio files. • Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted. • Use discs with MP3 files written in the format compliant with ISO 9660 level 1 or level 2. For details, see page 26-27. Insert a disc with the label side facing up. 20-EN About discs that can be used with the CDA-7893/CDA-7892 models. We recommend using only compact discs containing the marks shown below. You can play CD-Rs (CD-Recordable)/CD-RWs (CD- ReWritable) for audio use on this unit.You can not play CD-Rs/CD-RWs containing MP3 formatted audio files. • Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs not designed for audio use, CDs on which a recording failed or a re-recording was attempted. On handling Compact Discs (CD/CD-R/ CD-RW) • Do not touch the surface. • Do not expose the disc to direct sunlight. • Do not affix stickers or labels and do not write on the surface. • Clean the disc when it is dusty. • Make sure that there are no bumps around the disc. • Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached. NOTE The music sensor feature is functional in the play or pause mode. Fast Forward and Backward 1 Press and hold the g DN or f UP button to quickly move backward or forward until you reach the desired section of the track. Repeat Play 1 Press the REPEAT button to play back repeatedly the track being played. The track will be played repeatedly. Press the REPEAT button again and select OFF to deactivate the repeat play. NOTES • If a CD Changer is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected. > RPT > RPT ALL > (off) • In case a 6-disc CD changer is connected: In CD changer mode, press the “F” button to illuminate the "FUNC" indicator and go to step 1 within 5 seconds. • In case a 12-disc CD changer is connected: In changer mode, press the “F” button twice to illuminate the "FUNC" indicator and go to step 1 within 5 seconds. 21-EN CD Player Operation SOURCE BAND Select buttons (1 through 6) M.I.X. SCAN M.I.X. (Random Play) 1 Press the M.I.X. button in the play or pause mode. The tracks on the disc will be played back in a random sequence. To cancel M.I.X. play, press the M.I.X. button again to turn off the M.I.X. NOTES • If a CD Changer equipped with the ALL M.I.X. function is connected, ALL M.I.X. will also be selectable. In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. > M.I.X. > ALL M.I.X. > (off) • In case a 6-disc CD changer is connected: In CD changer mode, press the “F” button to illuminate the "FUNC" indicator and go to step 1 within 5 seconds. • In case a 12-disc CD changer is connected: In CD changer...

Herunterladen

Geben Sie zwei Ziffern: