Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
LIQUID CRYSTAL DISPLAY PANEL The liquid crystal display (LCD) panel displays the frequency, time and activated functions. Note: It is characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD readout will return to normal when the temperature increases to a normal range. TUNER 1) Turn power on by pushing the Power switch(10). 2) Use the Band Selector(3) to select either AM or FM 3) Use the Speaker Selector Switch(13) to choose speaker output 4) Use the Tuner Control(8) to select station 5) Adjust Volume Control(14 or 15) to suit taste CD PLAYER 1) Use the Speaker Selector switch (13) to choose between speaker output, headphones or both. 2) Press the CD eject button (7) to eject any CD’s that may already be in the player. 3) Press the CD Play/Pause button (the same as the CD Source Select button). 4) You may change tracks by using the Track Up or Track down buttons (19 or20). 5) To change to AM/FM or Aux. Inputs, press the corresponding button; to return to CD press the CD button. 6) To eject the CD, press the CD eject button(7). 7) CD Disc Insert Method Door Open Disc Insert Door Close Page 4 AUXILIARY INPUT 1) Push Power Switch (10) “On”. 2) Using the source Selectors (4), choose the button labeled “AUX”. 3) If there is an external source (example: CD shuttle) connected to the Auxiliary Input Jacks (24) on the rear of the radio, then you can listen to your external source through the system. SETTING THE CLOCK 1) Push Power Switch (10) “On”. 2) Press the T/F button to display the clock 3) Hold the T/F button (16) and simultaneously use the H and M buttons (19 and 20) to adjust hours and minutes. Note: The T/F also toggles between time and radio frequency on the display. USING THE AUDIO ADJUST BUTTON 1) You can toggle between volume, treble, bass and balance control by pressing the Audio Adjust button (9) 2) Once at the desired function, you can use the volume buttons to adjust. SETTING THE ALARM 1) Hold the Alarm set button (5) 2) Use the H and M buttons (19 and 20) to adjust hours and minutes. 3) The alarm On/Off button (6) activates or deactivates the alarm. BEEP FEATURE 1) Hold the Audio Adjust button to enable the beep feature (9). Lower right side of the display will display an audio symbol when this feature is turned on. 2) When this feature is on, turning different features on or off will produce two different tones, higher tone for ON and lower tone for OFF. 3) Completely removing power from the unit will turn the beep feature off. Page 5 Wiring Color Code: WIRING COLOR CODE FOR AWM-900S COLOR FUNCTION ORANGE/WHITE STRIPE +12VDC IGNITION POWER GREEN/WHITE STRIPE +12VDC BATTERY POWER BLACK/WHITE STRIPE POWER GROUND (-12VDC) WHITE LEFT (A) SPEAKER (+) VIOLET LEFT (A) SPEAKER (-) BLUE RIGHT (A) SPEAKER (+) LIGHT GREEN RIGHT (A) SPEAKER (-) RED LEFT (B) SPEAKER (+) VIOLET/BLACK STRIPE LEFT (B) SPEAKER (-) YELLOW RIGHT (B) SPEAKER (+) LT GREEN/BLACK STRIPE RIGHT (B) SPEAKER (-) Page 6 Installation: 1) Cut a mounting hole in the desired location using mounting hole diagram (below) and use the four 3x20min self tapping screws provided to mount the unit. 2) Route power, speaker and antenna cables through hole and connect to unit as outlined in the Wiring Color Code diagram on the previous page. 3) After making sure connections are correct, test operation. Specifications: Operating Voltage: 11-16VDC Output Power: 50 Watts Total (25 Watts per Channel) Output Wiring: 2/4 speaker and Headphone System Output Impedance: Compatible with 4-8 Ohm Speakers, 4 Ohm Load Min. Tuning Range: (AM)530-1720 KHz (FM) 87.5-108 MHz Sensitivity (AM) less than 15uv (FM) less than 2.5uv FM Stereo Separation: More than 30dB CD Frequency Response: 20-20,000 Hz CD Channel Separation: 50dB CD S/N Ratio: 60dB CD Distortion: 0.3% Size- Overall Size: 10.43”(W)x7” (H)x6.26 (D) 265mm(W)x178mm(H)x159mm(D) Mounting Size: 9.25”(W)x6.05”(H)x5.25”(D) 235mm(W)x154mm(H)x133mm(D) Weight: 4 lbs.(1.8 Kg) Page 7 WARRANTY 90 DAY / 12 MONTH LIMITED WARRANTY AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. After the initial 90 day period and for a period ...