Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Aiwa Dateigröße: 4.54 mb Dateiname: c59ed750-adca-4275-a3fc-2ac82cdabd1c.pdf Unterrichtssprache:

Connect the speaker cord with the white broken line to 0 and the other cord to O. o ~~ Sound signals can be input to this unit through the AUX/ VIDEO jacks. Use a cable with RCA phono plugs (not supplied) to connect the external equipment. Connect the red plug to the R jack, and the white plug to the L jack. To listen to the external source Press AUX and play the equipment. Refer also to the operating instructions of the connected equipment for details. 4 ENGLISH REMOTE CONTROL BEFORE OPERATION Inserting batteries Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries. When to replace the batteries The maximum operational distance of the remote control should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones. Using the remote control The instructions in this manual refer mainly to the buttons on the main unit. Buttons on the remote control with the same names as those on the main unit can be used as well. To use the FUNCTION button The FUNCTION button substitutes for the FUNCTION buttons (CD, AUX, TUNER/BAND, TAPE) on the main unit. Each time FUNCTION is pressed while power is on, the next function is selected cyclically. If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage. The remote control may not operate correctly when: -The line of sight between the remote control and the unit is exposed to intense light, such as direct sunlight -Other remote controls are used nearby (television, etc.) POWER FUNCTION PHONES To turn the power on Pi’eSs one of the FUNCTION buttons (CD, AUX, TUNER/ BAND, TAPE). Play of the inserted disc or the previously tuned station is received (Direct Play Function). POWER is also available. After use Press POWER to turn off the power. The display changes to the clock. When using on the batteries, you cannot turn the power on with the remote control. Using the headphones C[mnect headphones to the PHONES jack with a stereo mini riua (03.5 mm, ‘/8 inch). N~ CLEAR The unit can store a total of 24 preset stations for FM and AM. However, up to 16 stations can be preset for each band. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly. 1 Press press TUNER/BAND + DOWN or to select a band. PD UP to select Then, a station. z Press II SET to store the station. A station is assigned in consecutive order a preset for each number, band. beginning from 1 Preset number Frequency s Repeat steps 1 and 2. on m 000 000 0-9, +1 o 000 000 B BAND ‘“~ u o @) @ 1 Press BAND to select a band. 2 Press the numbered buttons O-9, +1 O to select a preset number. Example: To select preset number 15, press +1 O and 5. To select preset number 10, press +1 O and O. Selecting a preset station on the main unit Press TUNER/BAND to select a band. Then, press n PRESET repeatedly. Each time the button is pressed, the next highest number is selected. To clear a preset station %lect the preset station to be cleared. Then, press II SET, and press >...

Herunterladen

Geben Sie zwei Ziffern: