Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
REPEAT play —" lights up on the display. RANDOM/REPEAT play —RANDOM and "light up on the display. Cancel —RANDOM and " disappear from the display. To play all discs, press c to start play. To play a single disc, press one of DISC DIRECT PLAY 1-3 to start play. During random play it is not possible to skip to the previously played track with f. BLANK SKIP PLAY The silent portions between tracks recorded on a CD can be skipped during playback. 1 Press CD BLANK SKIP. “CD BLANK SKIP ON” is displayed and a small dot will appear in the display. Small dot 2 Press c to start playback. The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track fades out (ends with the sound gradually decreasing), the fadeout portion also will be skipped. To return to normal playback Press CD BLANK SKIP again, and the dot in the display will disappear. •There may be a case where BLANK SKIP PLAY does not function correctly. •BLANK SKIP PLAY is automatically canceled when performing AI EDIT RECORDING (page 16), PROGRAMMED EDIT RECORDING (page 17), or recording during PROGRAMMED PLAY (page 13) or RANDOM PLAY (page 13). PROGRAMMED PLAY Up to 30 tracks can be programmed from any of the inserted discs. Use the remote control. 1 Press PRGM while pressing SHIFT in stop mode. “PRG” is displayed . 2 Press DISC DIRECT PLAY 1-3 to select a disc. Go to the next step when the tray stops rotating. 3 Press numbered buttons 0-9 and +10 to program a track. Example: En To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and 0. Total number of Selected track number selected tracks Program number Total playing time of the selected tracks 4 Repeat steps 2 and 3 to program other tracks. 5 Press c to start play. To check the program Each time for g is pressed in stop mode, a disc number, track number, and program number will be displayed. To clear the program Press sCLEAR in stop mode. To add tracks to the program Repeat steps 2 and 3 in stop mode.The track will be programmed after the last track. To change the programmed tracks Clear the program and repeat all the steps again. To play the programmed tracks repeatedly After programming the tracks, press RANDOM/REPEAT repeatedly while pressing SHIFT until " appears on the display. •During programmed play, you cannot perform random play, check the remaining time, and select a disc or track. “Can’t USE” is displayed if you attempt to select a track. •“FULL” is displayed if you attempt to program more than 30 tracks. ENGLISH 13 RECORDING BASIC RECORDING RECORDING BASIC RECORDING INSERTING BLANK SPACES Insertion of 4-second blank spaces enables you to activate the Music Sensor function. (Applicable when the source is TUNER or VIDEO/AUX.) This section explains how to record from the tuner, CD player, or 1 Press w REC/REC MUTE during recording or while in external equipment. recording pause mode. Preparation • Use Type I (normal) tapes only. • Set the tape to the point where recording will start. • Note that recording is done on only one side of the tape. 1 Insert the tape to be recorded on into deck 2. Insert the tape with the side to be recorded on first facing out from the unit. 2 Press function (CD, TUNER or VIDEO/AUX) and prepare the source to be recorded. To record from a CD, press CD and load the disc(s). To record from a radio broadcast, press TUNER and tune in to a station. To record from a connected source, press VIDEO/AUX. 3 Press w REC/REC MUTE to start recording. When recording from a connected source, start playback of the source. 4 on the display flashes for 4 seconds and 4-second blank space is made. Then, the deck enters the recording pause mode. 2 Press a to resume recording. To insert a blank space of less than 4 seconds, press w REC/REC MUTE again while 4is flashing. To insert blank spaces of more than 4 seconds, after the deck enters recording pause mode, press wREC/REC MUTE again. Each time the button is pressed, a 4-second blank space is added. About cassette tapes • To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. To record on the tape again, cover the tab openings with adhesive tape, etc. • 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. • Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism. “Can’t REC” is displayed if you attempt to record on a tape with When the selected function is CD, playback and recording start simultaneously. To stop recording, press s. To pause recording, press a. (Applicable when the source is TUNER or VIDEO/AUX) To resume recording, press it again. Sound adjustment during recording The output volume and tone (except BBE) of the speakers or headphones are freely varied without affecting of the recording. 14 ENGLISH the plastic tabs broken off. To erase a recording 1 In...