Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
compact discs. • Do not expose compact discs to excess humidity or dust. Some CDs recorded in CD-R/CD-RW mode may not be usable. • Do not expose compact discs to direct heat from heaters. English Handling • Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Ball-point pen Roughness • Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. • Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. • Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage. • To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism. Cleaning • To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. • Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. • After using special compact disc cleaner, let the compact disc dry off well before playing it. Be sure to unfold and read the next page. / Veuillez deplier et vous referer a la page suivante. Cerciorese de desplegar y de leer la pagina siguiente. / Assicurarsi di aprire e leggere la pagina successiva. XMD3 4. NOMENCLATURE 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold). Names of the Buttons and their Functions English [ PWR ] button • Press the button to turn on the power. Press and hold the button for 1 second or longer to turn off the power. • Switches the operation mode among the radio mode, etc. [SCN] button • Performs scan play for 10 seconds for each track while in the CD mode. [ RPT ] button • Repeat play while in the CD mode. [ HOOK ] • Open the door by push up the hook. [ RDM ] button • Performs random play while in the CD mode. [ DOOR ] • Door must be totally closed to prevent water go into the unit. [ P/A ] button • Performs preset scan while in the radio mode. When the button is pressed and held, auto store is performed. [ D ] button • Switches the display indication(main display, sub display, clock display). [ T ] button • Use the button to input a title in the CD mode. • Press and hold the button for 1 second or longer to enter the adjust mode. [ Z+ ] button • Use the button to select one of the 3 types of sound characteristics already stored in memory. [ ISR ] button • Recalls ISR radio station in memory. • Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only). [s] button • Plays or pauses a CD while in the CD mode. [ DIRECT ] button • Stores a station into memory or recall it directly while in the radio mode. [ BAND ] button • Switches the band, or seek tuning or manual tuning while in the radio mode. • Plays a first track while in the CD mode. [ A-M ] button • Press and hold the button for 1 second or longer to switch the MAGNA BASS EXTEND on or off. • Use the button to switch to the audio mode (sub woofer, bass/ treble, balance/fader, Z-Enhancer plus adjustment). [ w ], [ z ] button • Press the buttons to increases or decreases the volume. [ a ], [ d ] button • Selects a station while in the radio mode or selects a track when listening to a CD. These buttons are also used to make various settings. • Press and hold the button for 1 second or longer to switches the fast-forward/fast-backward. [ M ] button • Turns mute on and off. [ CD SLOT ] • CD insertion slot. [ RESET ] button • Press and hold the button for about 2 seconds when the following symptoms occur. . Nothing happens when buttons are pressed. . Display is not accurate. [Q] button • Ejects a CD when it is loaded into the unit. XMD3 Major Button Operations when External Equipment is Connected to This Unit . When the CD/MD changer is connected . For details, see the section “CD/MD changer operations”. [ SCN ] button • Performs scan play for 10 seconds for each track. Disc scan play is performed when the button is pressed and held. [ RPT ] button • Performs repeat play. When this button is pressed and held, disc repeat play is performed. [ RDM ] button • Performs random play. Also performs disc random play when the button is pressed and he...