Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Keep in mind that lighting and other room conditions, in addition to battery age, can affect the operating range of an infrared remote control. You cannot use the remote control to set the time, alarms, CD random and repeat, or radio presets, nor to customize the display. Figure 7 Turns system on and sets sleep time, snoozes (delays) the alarm The WaveRadio/CDremote Turns the system on/off, deactivates the alarm --Raises or lowers volume Turns on CD play or pauses CD Stops CD Turns on FM --Turns on AUX mode Turns on AM Tunes radio, skips or scans CD --Mutes/unmutes the system --Turns on and selects a preset station Using the radio/CD control panel In addition to controlling the most frequently used functions of the radio, CD player, and alarms, control panel buttons allow you to set the time, alarms, CD mode, and radio presets (Figure 8). Using button combinations on the control panel gives you access to additional special features (such as customizing the display and programming the CD player). For details, refer to the "Quick Reference to Special Functions" on page 28. Three raised dots on the Sleep/Snoeze button of the control panel help you locate this frequently used button. Figure 8 The Wave Radio/CD control panel Sets the time Enters Alarm 1 and 2 setup mode Turns Alarm 1 on/off Alarm 2 on/off Turns on radio and stores/selects a preset station m Track/Tune Tunes radio, skips or scans CD Turns on CD play or pauses CD --Selects CD random/repeat Stops CD, turns tone alarm on/off Turns on FM m _Turns on AUX (auxiliarymode) Stop --Turns on AM Alarm Volume Wave Rao_o/CD Turns system on/off, Turns system on and Raises or lowers deactivates the alarm sets sleep time, volume snoozes (delays) the alarm Reading the Wave Radio/CD display Lights when Alarm 1 is Flashes when Shows Figure 9 Shows current time, The WaveRadio/CD display setting Alarm 1, and when alarm time, sleep selected FM or AM going off time, snooze time, presetIndicates activated, flashes while mute is volume, nap time, AM/FM Lights number, tone alarm Indicates frequency, CD time, when CD is CD track issetor CD isthe CD program item, playing, number, selected going off battery level flashes for brightnessIndicates source )ause or level stereo reception low battery I ] MLITE VOLUME_ ALARMI FH 1 --OFF .)))/STERECC[)_ _ e_ 2AM ALARM! TRACK ! IJ REPEAT SLEEP PRESET mm / Indicates the Alarm 1or2 status in Indicates the Indicates Lights for setup mode, selected source AM or PM presets and CD shows nap programming timer is on Lights when Alarm 2 is Indicates that sleep Indicates which activated, flashes while or nap timer is CD play mode is setting Alarm 2, and when selected selected going off Setting the time Function To set the clock -Hold down either Time <1 or _ button or press the same one twice. The time display changes slowly at first, then faster. Release the clock set button to stop. Customizing the display Function To set AM/PM (12 hour) or Military (24 hour) time -With the system off, hold down Alarm Setup and press On/Off to switch between AM/PM (12 hour)and Military (24 hour) time formats. To select c|ock or source display mode -With the system on, hold down Alarm Setup and press either Preset 1 to select clock display or Preset 2 to select source display. • In clock display mode, the display shows the time while you are listening to the radio, CD, or AUX. In source display mode, the display shows information about the selected source (radio, CD, or AUX). In source display mode, press the Time 4 or _ to show the time momentarily. To adjust the display brightness -The display dims automatically to medium or low brightness, as appropriate for low light room conditions. You can adjust the brightness setting of the display for both strong light and lowest light environments, but not for the medium light setting. Turn the system off before setting brightness levels. In a strongly lit room, hold down CD Mode _ and press Volume A or V to adjust the setting between 5 and 9 (it is preset to 8). In a barely lit room, hold down CD Mode _ and press Volume A or V to adjust the setting between 1 and 5 (it is preset to 2). If you do not want the system to dim automatically, set both levels to 5. To turn off the display -With the system off, hold down CD Mode _ and press On/Off to turn off the main display. The display only lights briefly when you press any buttons and while the alarm is sounding. Repeat this step to turn the main display back on. To check the volume setting when it is not displayed -With the system off or on, hold down Alarm Setup and press Volume A or V to see the current volume setting. To check the CD time or radio station frequency when it is not displayed With the system on, hold down Alarm Setup and press Track/Tune <_or _ to seethe CD time or station frequency. To check the time when it is not displayed -With the system on or off, press the Time _ or _. briefly to see the current time. hold and press Controlling the system Functio...