Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: LG Dateigröße: 127.42 kb Dateiname: Unterrichtssprache:

3. Eject Button 4. Emergency Eject Hole 1. Power Connector This connector is used to connect to the USB power cable. (DC-jack type) Or, this connector is used to connect to the AC Power adapter cord (5V, 2A, outside diameter: 4mm, inside diameter: 1.75mm) (Not supplied). 2. USB Connector This connector is used to connect to the USB 2.0 cable. Location and function of controls Removing the USB converter cable (For Windows) The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 2 NOTE Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. The removing procedure varies depending on your OS. External Quick Set-up Guide Super Multi DVD Rewriter GP08 To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive, please refer to the CD manual. Features • Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. • Buffer Under Run error protection technology • Emergency eject support • Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. • Supports region playback control Phase II. • Supports SecurDiscTM Technology. • Supports LightScribe Direct Label Printing Technology - *Optional. * You can use a variety of Drive GP08LU10 GP08NU10 Light Scribe X I/F USB 2.0 only USB 2.0 only Package Items Item Quantity - External Super Multi DVD Rewriter 1 - USB 2.0 cable 1 - USB Power cable (DC-jack type) 1 - Software CD 1 - Quick Guide for Drive 1 Cautions System meeting the following requirements is needed in order to use USB 2.0 operation with this drive. • Computer that is equipped with a USB 2.0 – compliant USB connector or PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller Interface) driver software 1) has been installed. 1) The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP. If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC manufacturer, or consult the Microsoft Corporation Web site. System Environment Computer This unit can be operated in the system environment explained here. System requirements CPU Pentium III 1.0GHz or Higher(with USB 2.0) for basic performance (Recommended for optmal performance: Pentium IV 2.4GHz or Higher). Memory 256MB or larger (Recommended: 512MB). Hard disk 20GB or more free space. (The free space needed for writing depends on the quantity of data.) Video Memory 64MB (Recommended: 128MB). Interface USB 2.0 port CD-ROM drive For Software installation Software Required OS Windows Vista/Windows XP Home Edition/Professional Direct X 9.0 or Higher Mac OS X: Ver 10.4.10 or Higher CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD±R DL discs CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That’s, TDK, Ritek or HP discs are recommended. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are recommended. DVD-R : Mitsubishi Kagaku Media, Maxell, That’s are recommended. DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are recommended. DVD+R : Mitsubishi Kagaku Media, That’s, Maxell are recommended. DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are recommended. DVD-RAM : Maxell, Mitsubishi Kagaku Media are recommended. DVD±R DL : Mitsubishi Kagaku Media, Verbatim are recommended. * For Windows Vista, 512MB of RAM or large is recommended. * Compatibility problem in write/read function may occur with some media depending on the media manufacturing quality. * To achieve maximum Record & Write speed your system may require data to be copied first to the computer’s hard drive rather than directly from another source disc or drive. Specifications . The drive’s appearance and specifications may change without prior notice. - The maximum data transfer rate varies according to the performance capabilities of the PC. - For the sake of periodic improvements, specifications and appearance are subject to change without notice. - We have taken all possible measures to assure the quality of our products, but we cannot be responsible for the consequences if defect occurs. Software Install the appropriate CD Recording Authoring Software before using this unit. * Please uninstall any previous CD burning software you may have loaded on your PC in order to prevent possible compatibi...

Herunterladen

Geben Sie zwei Ziffern: