Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Connecting to your home network This player can be connected to your wired network using the Ethernet port on the back of your player or using a wireless network. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. There are three types of wireless network connections: • User selects a network form a list of available networks • User uses WIFI protected Setup Connecting to the Internet with a wireless network: 1 Set up your access point or wireless router (if not already set up). 2 Press ENTER. The Settings menu opens. 3 Press . or . to select Network, then press ENTER. 4 The Wireless Settings screen opens. 5 Press ENTER. The Network List screen opens showing a list of available wireless networks. 6 Press . or . to select the wireless network you want your player to connect to, then press ENTER. A Network Setup screen opens with the following options: • Connect—Connect to this network. • Disconnect—Disconnect from this network. • Delete—Delete the current network. • WPS Pin—Create a random PIN number password. 7 If your network does not use encryption, press . or . to select Connect, then press ENTER. If the wireless network is working, you should see a checkmark and a connected message on the TV. If the message does not appear, repeat the steps above. OR If your network uses encryption: a Press . or . to select the Password field, then press ENTER. An on-screen keyboard opens. b Press ., ., ., or . to select the first letter in the password, then press ENTER. Repeat this step to enter the rest of the password. If you make a mistake, use the clear key to delete the character. c After you enter the password, select the red “Done” in the upper left-hand corner of the keyboard, then press ENTER to close the keyboard. d Press . or . to select Connect, then press ENTER. A connection message appears. Select Close, then press ENTER. If the connection is not successful, repeat the steps above. Connecting to the Internet with a wired network: 1 Connect a network cable to the INTERNET jack on the back of your player and into a wired router using a commercially available LAN or Ethernet cable 2 Press ENTER. The Settings menu opens. Congratulations on your purchase of a high-quality Dynex product. Your DX-WBRDVD1/DX-WBRDVD1-CA represents the state of the art in Blu-ray Disc player design and is designed for reliable and trouble-free performance. Package contents • Blu-ray disc player • AAA batteries (2) • Remote control • User Guide • Quick Setup Guide Installing remote control batteries 1 Remove the battery compartment cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3 Replace the battery compartment cover. For the most updated User Guide, please visit Quick Setup Guide I DX-WBRDVD1/DX-WBRDVD1-CA for Connected Blu-ray Disc Player TV Back of player Back of player A/V cable TV Settings Language Parental System Network Display Audio BD-Live Network List WiFi Protected Setup(WPS) Manual IP Settings Wireless Network List Hartleys Steven Linsys Wired router Back of player Network cable Yellow=Video White=Left audio Red=Right audio Settings Audio Network Display Display HDMI Status HDMI preferred Format Resolution TV Aspect Film Mode(1080p24) Deep Color Connected 1080P HDMI Auto 16:9 Original Off Auto System Language BD-Live Parental ENGLISH 11-0151 3 Select Network. 4 If the network connection is active, Link Up appears next to Link Status. If the network connection is not active, Link Down appears next to Link Status. 5 Press ENTER, select IP Mode, then press ENTER. 6 Press . or . to select an IP Mode. You can select: • Dynamic - Uses DHCP to automatically obtain an IP address. • Manual - Lets you manually configure network settings. (See your User Guide to set up your connection manually.) 7 Press . to go to the previous menu. Advanced users only: To make changes to your network connection, see your User Guide. Testing your network connection 1 Press ENTER. The Settings menu opens. 2 Press . or . to select Network, then press ENTER. 3 Press . or . to select Network Test, then press ENTER. The Network Test begins and runs three tests: 1 Local Network Test. If this test fails, check the connection to your home network. • If you have a wired connection: * Make sure your network cable is securely attached to your router and your player. * Make sure your router is connected to your cable or DSL modem correctly. • If you have a wireless connection: * Make sure your router is connected to your cable or DSL modem correctly. * Make sure your player is within the range of your router. * Make sure the desired WIFI network is selected. * If you have a security password, be sure you have entered the password correctly. * If further help is need for setting up security and obtaining...
Dieses Handbuch ist für folgende Modelle:Blu-Ray Player - DX-WBRDVD1-CA (621.23 kb)