|
Fotos und technische Daten Philips BDP7500S2 |
Anleitung Zusammenfassung
Note • When you clear the local storage, previous download of BD-Live bonus contents is no longer available. [DivX® VOD Code] Display the DivX® registration code or de-registration code. Tip • Use this product’s DivX registration code when you rent or purchase video from The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered. [Version Info.] Display the software version and the MAC address of this product. Tip • This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this product. [Restore Default Settings] Reset all the settings of this product to the factory settings, except for [Parental Control] setting. 7 Additional Information Update software For software updates to enchance performance, check the current software version of this product to compare with the latest software (if available) at the Philips website. 1 Press . 2 Select [Setup], and press OK. 3 Select [Advanced Setup] > [Version Info.], and press OK. Update software via network 1 Set up the internet connection (see “Get started’ > “Set up a network”). 2 In the Home menu, select [Setup] > [Advanced Setup] > [Software Update] > [Network]. » You are prompted to start upgrading process if upgrade media is detected. 3 Follow the instructions on the TV screen to confirm update operation. English EN 23 » Once software update is complete, this • Pb: 0.7 V-pp (75 ohm) product automatically turns off to standby. • Pr: 0.7 V-pp (75 ohm) Update software via USB 1 Go to to check if the latest software version is available for this product. 2 Download the software into a USB flash drive: a Un-zip the download, and make sure that the un-zipped folder is named “UPG”. b Put the “UPG” folder in the root directory. 3 Insert the USB flash drive to the (USB) jack on the front panel of this product. 4 In the Home menu, select [Setup] > [Advanced Setup] > [Software Update] > [USB]. 5 Follow the instructions on the TV screen to confirm update operation. » Once software update is complete, this product automatically turns off to standby. Note • Do not turn off the power or remove the USB flash drive when software updating is in progress to prevent possible damage of this product. Care Caution • Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs. Clean discs Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement. Specifications Note • Specifications are subject to change without notice Video • Signal system: PAL / NTSC • Composite video output: 1 Vp-p (75 ohm) • Component video output: 480/576i, 480/576p, 720p, 1080i • Y: 1 Vp-p (75 ohm) • HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24 Audio • 2 Channel analog output • Audio Front L + R : 2 Vrms (> 1 kohm) • Signal to noise ratio: > 120 dB • Dynamic Range (1kHz): >100 dB • Total harmonic distortion: <90 dB • 7.1 Channel analog output • Audio Front L + R : 2 Vrms (> 1 kohm) • Audio Surrond L + R : 2 Vrms (> 1 kohm) • Audio Center : 2 Vrms (> 1 kohm) • Audio Subwoofer : 1.15 Vrms (> 1 kohm) • Audio Rear L + R: 2 Vrms (> 1 kohm) • Digital output: 0.5 Vp-p (75 ohm) • Optical, Coaxial • HDMI output USB • Compatibility: Hi-Speed USB (2.0) • Class support: UMS (USB Mass Storage Class) Main unit • Power supply rating • Europe: 220~240V ~AC, ~50 Hz • Power consumption: 22W • Power consumption in standby mode: < 0.25 W • Dimensions (w x h x d): 435 x 55.7 x 245 (mm) • Net Weight: 2.4 kg Accessories supplied • Remote control and batteries • Audio/Video cables • Power cable • Quick start guide • User manual Optional accessory • A wireless Philips USB adapter(named WUB1110, sold separately) • Multimedia connections: Wi-Fi 802.11b/g/n • Connectivity: Rear connection (USB) • Ambient temperature: 5 deg C to 40 deg C. • Dongle dimensions (W x H x D): 28.4 x 82 x 13.4 mm Laser Specification • Laser Type: • BD Laser Diode: AlGaInN • DVD Laser Diode: AlGaInP • CD Laser Diode: AlGaInP • Wave length: • BD: 405 +5nm/-5nm • DVD: 655 +10nm/-10nm • CD: 790 +10nm/-20nm • Output power: • BD: Max. ratings: 20mW • DVD: Max. ratings: 6mW • CD: Max. ratings: 7mW 24 EN 8 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at Main unit No reaction to the remote control. • Connect this product to the power outlet. • Point the remote control at the IR sensor located on the front panel of this product. • Insert the batteries correctly. • Insert new batteries in the remote control. Picture No picture. • See TV manual for corr...
Dieses Handbuch ist für folgende Modelle:Blu-Ray Player - BDP7500 MK II (1.19 mb)
Blu-Ray Player - BDP7500B2 (1.19 mb)