Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
RQT9131 41 Different kinds of playback for BD-Video [BD-V] Some discs permit a variety of interactive functions in addition to the ordinary playback operation. Showing Pop-up menu The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method, refer to the instructions for the disc. 1 During play Press [DIRECT NAVIGATOR]. .Pop-up menu also appears by pressing [OPTION] and selecting “Pop-up Menu”. e.g., Next Previous 2 Press [3, 4, 2, 1] to select the item and press [OK]. To exit the screen Press [DIRECT NAVIGATOR]. To enjoy the BONUSVIEW™ compatible BD-Video This unit is compatible with the BONUSVIEW™ (BD-ROM version 2 Profile 1 version 1.1/Final Standard Profile), which is a new playback function of the BD-Video. You can enjoy the secondary videos on the BD-Video, such as director commentary, the sub-stories in simultaneous progression, or viewing from different angles, in addition to the main movie recorded on the disc. There are various playback methods depending on the discs. Refer to the instructions attached to the disc and enjoy. Image of the secondary video e.g., Secondary video Primary video When the secondary video does not display Turn the “Video” and “Soundtrack” to “On” in the “Secondary Video” in the “Signal Type” in the Disc menu. (. 76) .Playback method set by the disc will take priority, so it may not playback in the method set in this unit. .To output the audio of the secondary video, set the “BD-Video Secondary Audio” to “On” in the Setup menu (. 85). [Note] .There are functions to enjoy link-up with the SD cards in the BD-Video specification. Discs with this function may become available in the future. Enjoy the function by reading the instruction attached to the disc in that case. (current as of May 2008) .After enjoying with above disc, if the BD-Video data recorded on the SD card is no longer needed, it can be erased by “Delete BD-Video data” of the “Card Management”. Select “Delete BD-Video data” in step 1 of the “Enabling the unit’s recording function—Format” (. 80). RQT9131 42 Enjoying High Bit rate Audio and Video of BD-Video Regarding High Bit rate Audio This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, connect this unit to your amplifier/receiver supporting HDMI Ver. 1.3 using a High Speed HDMI cable (. 95) and set “Priority Setting” (. 85) to “Audio Quality”. However, there are the following restrictions. .The clicking sound on the menu and audio with secondary video cannot be output. .Any audio format not decoded by the connected amplifier/receiver cannot be output properly. If you want to output the audio properly, set “Priority Setting” to “Secondary Audio” or “User Setting”. . Differences in audio output by setting The output audio type can be changed depending on the menu settings. Set “Priority Setting” in accordance with your favourite audio with reference to the following table. To enjoy secondary audio ; ; ; ; Secondary Audio .“BD-Video Secondary Audio” is set to “On”, and “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”, “MPEG” are fixed to “PCM”. .Data of 6 channels or more will be output in 5.1 channels. When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to “Off”. To enjoy high bit rate audio Select this mode if your amplifier/receiver is equipped with these decoders. ; ; ; ; Audio Quality .“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”, “MPEG” are set to “Bitstream”, and ‘“BD-Video Secondary Audio” is fixed to “Off”. The clicking sound on the menu and audio with secondary video is not outputted. Original audio Dolby Digital Plus Dolby TrueHD DTS-HD High Resolution Audio DTS-HD Master Audio Audio formats are output as: PCM Original audio Dolby Digital Plus Dolby TrueHD DTS-HD High Resolution Audio DTS-HD Master Audio Audio formats are output as: Dolby Digital Plus Dolby TrueHD DTS-HD High Resolution Audio DTS-HD Master Audio To set the high bit rate audio and secondary audio individually User Setting “BD-Video Secondary Audio”: On”§ “BD-Video Secondary Audio”: Off PCM Bitstream PCM Bitstream Maximum 5.1ch PCM Dolby Digital Maximum 5.1ch PCM The original format § When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to “Off”. [Note] Enjoying 7.1ch LPCM Connect this unit to your amplifier/receiver using an HDMI cable, and select “Audio Quality” or “User Setting” and then set “BD-Video Secondary Audio” to “Off”. When the unit is connected using the DIGITAL AUDIO OUT terminal, there are restrictions for high bit rate audio. Different kinds of playback for BD-Video/ Enjoying High Audio and Video of BD- Original audio PCM Bitstream “BD-Video Secondary Audio : “On § “BD-Video Secondary Audio :...