Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Panasonic DMP-BDT300 |
Anleitung Zusammenfassung
.There is no effect on “Bitstream” via HDMI AV OUT and DIGITAL AUDIO OUT. .The audio will be output in “Stereo” in the following cases; – AVCHD playback – Playback of secondary audio (including the button click sound). 7.1ch Audio Reformatting Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch. .If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.) Audio reformatting is enabled in the following cases: .When you have selected “PCM” in “Digital Audio Output”. .When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM. High Clarity Sound When connected to TV via the HDMI terminal for outputting image, it produces clearer sound. .Set to “Enable” and then set “High Clarity Sound” on the Playback menu to “On”. (• 29) Audio Delay Mis-sync between the video and audio is corrected by delaying the audio output. Display Status Messages Choose whether to show status messages automatically. On-screen Language Choose the language for menus and on-screen messages. Screen Saver Function This is to prevent burn-in on the screen. .When this is set to “On”: If there is no operation for 10 minutes or more, Direct Navigator screen switches to FUNCTIONS screen automatically. .While playing and pausing, etc., this function is not available. .As for Music [CD-DA] or MP3, regardless of the setting, if there is no operation for a while, Direct Navigator screen switches to the other states automatically. FL Display Changes the brightness of the unit’s display. .If “Auto” is selected the display is dimmed during playback and bright not during playback. SD Card LED Control Set the lighting method for the SD card LED. .If “SD inserted” is selected, and this unit is turned on and SD card is inserted, the lamp is lighted. HDMI(SUB) V.OFF LED Control Set to light the HDMI (SUB) V.OFF LED or not. .This will light when “HDMI(SUB) Output Mode” (• 32) is set to “V.OFF”, and the power of the connected equipment to the HDMI SUB AV OUT is on. License Information about the software used by this unit is displayed. Settings VQT2J87(ENG) TV / Device Connection TV / Device Connection 3D Type Select the format of the connected TV. .Change the settings for 3D on the TV also when “Checker board” and “Side by side” are selected. TV Aspect Set to match the type of television connected. When connected to a 4:3 aspect television and playing 16:9 ratio image: 4:3 Pan & Scan The sides are cut off so the picture fills the screen. When playing BD-Video, video is output as “4:3 Letterbox”. 4:3 Letterbox Black bands appear at the top and bottom of the picture. When connected to a 16:9 widescreen television and playing 4:3 ratio image: 16:9 Video is displayed as a 4:3 ratio image in the center of the screen. 16:9 Full Video is displayed as a horizontally stretched 16:9 image. HDMI Connection Press [OK] to show the following settings: HDMI Video Mode Select “On” when video is output from HDMI AV OUT terminal. On Images are output from the HDMI terminal in the resolution set in “HDMI Resolution”. Off Images are output in the resolution set in “Component Video Resolution”. HDMI(SUB) Output Mode Set to output the video from the HDMI SUB AV OUT terminal or not. HDMI Resolution The items supported by the connected devices are indicated on the screen as “.”. When any item without “.” is selected, the images may be distorted. .If “Auto” is selected, automatically selects the output resolution best suited to the connected television. .To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible. 24p Output When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p. .When playing DVD-Video, set to “On” and then also set “24p” in “Video” (• 29) to “On”. .When BD-Video images other than 24p are played, images are output at 60p. HDMI Color Mode This setting is for selecting color-space conversion of the image signal when the unit is connected using an HDMI cable. HDMI Audio Output This setting selects whether or not to output audio from HDMI. .Select “Off” when the TV is connected to this unit via an HDMI terminal, and this unit is also connected to other devices, such as an amplifier/receiver via a COAXIAL or an OPTICAL terminal. VIERA Link Set to use “HDAVI Control” function when connected with an HDMI cable to a device that supports “HDAVI Control”. .Select “Off” when you do not want to use “HDAVI Control”. Deep Color Output This setting is for selecting whether to use Deep Color output when a television that supports Deep Color is connected. Contents Type Flag Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this fun...
Dieses Handbuch ist für folgende Modelle:Blu-Ray Player - DMP-BDT350 (3.19 mb)