Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Panasonic Dateigröße: 4.3 mb Dateiname: a5ed8c65-e4f5-4ea4-8802-0178945d2904.pdf Unterrichtssprache:

For Asia: “+8” For Middle East: “+4” Summer Time .On .Off Select “On” when using Daylight Saving time. MAC Address (• 14) Displays the “MAC Address” of this unit. “General” Remote Control (• 41) .Set Code 1 .Set Code 2 .Set Code 3 Quick Start .On .Off Speed of startup from standby mode is increased. Internal control unit will be powered when it is set to “On”, so contents of the .When the setting of “Standby Power Save” is enabled on the TV following will be different from the time it is set to “Off”. that supports HDAVI Control 4, it will take longer to startup this .Idle power consumption will increase. (about the power consumption• unit when the power supply of the TV is on standby mode even if • 43) the “Quick Start” is set to “On”. .The cooling fan may turn slowly to prevent overheating of internal parts. Easy Setting .Yes .No You can execute the basic setting (“TV Aspect”, “Analog Audio Output” [BD80] and “Quick Start”). Default Settings .Yes .No This returns all values in the Setup menu and the on-screen menu, except for “Remote Control”, “IP Address / DNS Settings”, “Proxy Server Settings”, “Network Service”, “DVD-Video Ratings” and “BD-Video Ratings” to the default settings. DivX Registration [DivX] (• 24) You need this registration code to purchase and play DivX Video-on-Demand (VOD) content. Firmware Update (• 13) .Press [OK] to show the following settings. Automatic Update Check .On .Off When this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary. Update Now .Yes .No You can update the firmware manually. RQT9407 32 Changing the speaker setting to suit your speakers [BD80] When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the amplifier/receiver. The settings are effective when connecting to analog 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal. Preparation 1 Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (• 31) A message is displayed. 2 Press [OK]. Center (C) Front (L) Front (R) Complete Test Subwoofer (SW) (LS) Surroundms ms LComplete Test LS RSWRSdBdBdBdB dB dBLB RB0.00.0 0.0 0.00.00.0 0.00.0 ms dBdB 0.0 0.00.0 C (RS) (LB) Surround back (RB)§ § Surround back channel is enabled only when setting “Analog Audio Output” to “7.1ch”. Speaker presence and size ( L LSR SWC RS LB RB ) Set all the connected speakers individually. 1 Press [3, 4, 2, 1] to select the speaker icon and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. Icon examples: Surround speaker (LS) .Large: Select when the speaker Large Small No supports low-frequency (under 100 Hz) reproduction. LS LS .Small: Select when the speaker does not support low-frequency reproduction. In order to make an ideal listening environment, settings of speaker sizes may be automatically adjusted. For example, if the subwoofer is set to “No”, the front speakers will automatically be set to “Large”. (In this case, we recommend connecting a speaker that can reproduce bass below 100 Hz.) Delay time ( ms 0.0 ) For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference. If either distance A or C is less than B (• below) find the difference in the relevant table and change to the recommended setting. 1 Press [3, 4, 2, 1] to select the delay time box ( ms 0.0 ) and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. 5.1ch speaker 7.1ch speaker connection connection Approximate room dimensions L LS R SW C RS RSLS C ABCLB L RRSSWC RBC RB RSLS LB ABCCLS: Actual speaker position : Ideal speaker position ABC : Primary listening distance Circle of constant primary listening distance A Center speaker C Surround/Surround back speakers Difference Setting Approx. 34 cm 1.0 ms Approx. 68 cm 2.0 ms Approx. 102 cm 3.0 ms Approx. 136 cm 4.0 ms Approx. 170 cm 5.0 ms Difference Setting Approx. 170 cm 5.0 ms Approx. 340 cm 10.0 ms Approx. 510 cm 15.0 ms Channel balance ( dB 0.0 ) 1 Select “Test” and press [OK]. A test signal is output. Front (L)_—)Center (C)_—)Front (R)_—)Surround (RS) :; Surround (LS)(— Surround Back (LB) (— Surround Back (RB) 2 While listening to the test signal, press [3, 4] to adjust the volume of each speaker Front speakers: 0.0 to s6.0 dB Center speaker, Surround/Surround Back speakers: 0.0 to s12.0 dB 3 Press [OK]. The test signal stops. .No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste. Settings To finish the speaker setting Press [3, 4, 2, 1] to select “Complete” and press [OK]. RQT9407 33 About MP3/JPEG/DivX files File format MP3 JPEG Playable media CD-R*1, CD-RW*1, DVD-R*1, 5, DVD-R DL*1, 5, USB devic...

Herunterladen

Geben Sie zwei Ziffern: