Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: GE Dateigröße: 605.34 kb Dateiname: 200991516395086.pdf Unterrichtssprache:

Press down (8) to decrease the speed stepwise, as often as down (8) is pressed. Press timer button (11) to set the time for which the blender should be activated. The LCD display (2) blinks timer. The LCD display blinks timer and the default time of 1:00 minute. The blend and speed 12 indicator stop blinking. Press up (6) or down (8) button to adjust the time up or down in 10 seconds increments or decrements. Notes The time entry stops after 5 seconds. If button is not pressed, the blender goes back to speed setting mode. Press timer button (11) again, to enter time entry mode. The blender is not required to run in order to set the timer. It can be set in stop mode. The timer mode is only active after pressing timer button (11). After the countdown cycle is completed, the timer indicator and time will turn off. Press and hold the up (6) or down (8) button to set time or speed successively. Press start/stop button (3) to start operation. The LCD display (2) shows the set time as countdown. Press up (6) or down (8) during countdown cycle to adjust the speed in operation. Press timer button (11) during countdown cycle and adjust the time with up (6) or down (8) while in operation. OPERATION Notes Press start/stop button (3) to continue operation and complete the paused countdown cycle. The countdown cycle can also be interrupted by pressing drink button (10) or salsa button (9). Press and hold the timer button (11) for 2 seconds to turn off the timer mode anytime. After the countdown cycle is completed, the blender stops operation and switches to standby mode. The LCD display (2) blinks blend indicator and default speed 12. If start/stop button (3) is pressed before the end of the countdown cycle, the blender stops operation and all indicators and settings are blinking on the LCD display (2). If no button is pressed after resetting speed or time for 3 minutes, the blender goes to standby mode, the power ON/OFF button (1) lights up blue at 25% of its overall intensity. If the power ON/OFF button (1) is pressed within 15 minutes, the LCD display (2) shows the previously settings. After 15 minutes all settings are deleted and the blender goes back to normal mode. Pulse function Press and hold high pulse button (4) or low pulse button (5) to operate the blender as long as the button is kept depressed. The LCD display (2) blinks pulse and 1 or 2 for the high or low pulse setting. All other indicators are off. Release the high pulse button (4) or low pulse button (5) to stop blending. The blender goes back to standby mode. Drink and salsa button There are two predefined programs, for drink and salsa preparation. Use each to prepare soft drinks or dip sauce respectively. Press drink button (10) or salsa button (9). The LCD display (2) blinks and shows timer information for each mode. OPERATION Mode LCD display (2) shows Drink timer 0:35 drink Salsa timer 0:32 salsa Press start/stop button (3) to start operation. After completion of the countdown cycle, or if start/stop button (3) is pressed, the blender goes back to standby mode. Note: Timer for drink and salsa mode cannot be adjusted. WARNING: 1. Always turn blender to “off” and unplug when not in use. Motor will continue to rotate when a function button is pressed even if jar (17) is not mounted. 2. Never open the lid (19) during operation (ill. h). 3. After 3 minutes without operation, blender automatically enters standby status. 4. If the blender stops for unkown reason, this might be because the motor speed dropped below 1000rpm for more than 5 seconds. In this case the blender will stop and go back to original setting mode. OPERATION Blending speed settings Speed Function Description 1 stir Mixes ingredients. The blender cycles between the set speed and a lower speed. 2 aerate Aerates ingredients. The blender cycles between the set speed and a lower speed. 3 puree Blends ingredients into a puree. The blender cycles between the set speed and a lower speed. 4 crumb Breaks ingredients into small pieces. The blender cycles between the set speed and a lower speed. 5 chop Chops ingredients into small pieces. The blender cycles between the set speed and a lower speed. 6 blend Mixes ingredients into uniform mixture. The blender cycles between the set speed and a lower speed. 7 mince Chops ingredients into very fine pieces. The blender cycles between the set speed and a lower speed. 8 grate Cuts ingredients into small pieces. The blender cycles between the set speed and a lower speed. 9 grind Crushes ingredients into powder. The blender cycles between the set speed and a lower speed. 10 beat Mixes ingredients rapidly into a mixture. The blender cycles between the set speed and a lower speed. 11 liquefy Turns ingredients into liquid. The blender cycles between the set speed and a lower speed. 12 whip Beats ingredients into a froth or foam. The blender cycles between the set speed and a lower speed. Select the suitable speed setting for the mixing task you like to complet...

Herunterladen

Geben Sie zwei Ziffern: