Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This is normal and will dissipate with use. • The blending blades are extremely sharp. Avoid any contact with fingers and hands. Note Assembling and attaching the blender Step 1. Place the motor base on a flat, dry surface such as a table top. Make sure that the motor base is turned off at the power outlet and the power cord is unplugged. Step 2. To reassemble the blender pitcher, replace the silicon seal onto the blade assembly (see Page 14 - Fig 1). Turn the blender pitcher over and insert the blade assembly housing into the pitcher base (see Page 14 - Fig 2). Twist the Blade Removal System counterclockwise until firmly locked into position. Step 3. Turn the blender pitcher upright and insert onto the motor base. The handle of the blender pitcher can be positioned to the left or right hand side of the appliance. Step 4. Add food or liquid into the blender pitcher ensuring not to exceed the ‘MAX’ mark. Place the blender lid firmly into position on the top of the blender pitcher. Insert the clear inner lid into the blender lid and turn clockwise to lock into position. (see Fig 1) Fig 1 Operating your Breville Hemisphere Blender continued Operating your Breville Hemisphere Blender continued The Breville Hemisphere Blender features a patented assist lid. This allows the lid to fit tightly onto the blender pitcher, avoiding displacement during operation. The ring pull design allows the user to easily remove the lid with a simple leverage action. (See Fig 1) Note Fig 1 Step 5. Plug the power cord into a 110 / 120V power outlet. Step 6. Press the ‘Power’ button on the far left of the control panel to turn the blender on. The ‘Power’ button will illuminate and flash. Do not fill the blender pitcher above the ‘MAX’ line. When the blender pitcher is filled at or near the ‘MAX’ line place one hand on the blender lid to avoid displacement of the lid during operation. Note Step 7. Select the required speed (1 to 4) by pressing the corresponding speed button. The blender will start to operate and the selected speed button will illuminate. The ‘Power’ button will illuminate and cease to flash. The ‘Stop’ button will illuminate and flash. Operate the blender only for the appropriate amount of time required – do not over process. Note NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON BLENDER WHILE THE MOTOR IS RUNNING. Step 8. When 60 seconds is reached, the blender will automatically cease to operate and the selected speed button and ‘Stop’ button illumination will go out. The ‘Power’ button will illuminate and flash. • The ikon Blender will automatically stop blending after 60 seconds. This is a safety feature. • To stop blending at any time, press the ‘Stop’ button or the selected speed button. The ‘Power’ button can also be pressed, but this will also turn the appliance off and all illuminations will go out. • The speed can be changed at any time during the blending process. Each time a new speed is selected its button will illuminate and the previous speed button illumination will go out. • The maximum amount of ice cubes the blender can blend at any one time is 1 standard ice tray or 9 oz. Use Speed 2/Mix. Note Step 9. For ingredients that require short bursts of power, select the ‘AUTO PULSE’ function. The ‘AUTO PULSE’ button will illuminate and remain illuminated while the button is pushed. Press the ‘AUTO PULSE’ button in short bursts until blending is complete. Use the ‘AUTO PULSE’ button when the food that is being processed is too thick or coarse to circulate within the blender pitcher. Note Step 10. The Breville ikon Hemisphere Blender features an additional 'SMOOTHIE' function. This is a pre- programmed cycle which automatically adjust the blending time and speeds to optimize blending results. Select the required function by pressing the corresponding function button. The blender will start to operate and the selected function button will illuminate. The ‘Power’ button will illuminate and cease to flash. The ‘Stop’ button will illuminate and flash. When the programmed cycle has finished, the blender will automatically cease to operate and the function button and ‘Stop’ button illumination will go out. The ‘Power’ button will illuminate and flash. Operating your Breville Hemisphere Blender continued Operating your Breville Hemisphere Blender continued Step 11. At the end of use, always make sure the Breville Hemisphere Blender is turned off by pressing the ‘Power’ button on the control panel. And then unplug the cord. Make sure the motor and blades have completely stopped before attempting to move the appliance, or when the Breville Hemisphere Blender is not in use and before disassembling, cleaning and storing. The Breville ikon Hemisphere Blender features a motor overload protection feature. If the motor is being overloaded, the motor will stop and the function key LED's will illuminate and flash. To restart it again, unplug from the mains and let it cool down for 30 minutes or longer. Note • Dur...