Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The blender remains switched on for as long as the On/Off button is pressed. To prevent the mixing products from spraying out, do not press the On/Off button until the mixer foot is immersed in the food to be mixed. Always switch off the blender before extracting it from the mixed food. • When you have finished processing the food, release the On/Off button. • Unplug the mains plug. • Press the release buttons and remove the mixer foot from the basic unit. Multi-function accessory with tools Risk of injury due to sharp blade/ rotating drive Never insert fingers into the bowl during operation. Always use the pusher (13) to push ingredients into the beaker. The drive continues to run for a short time after the blender is switched off. Do not change the tool until the drive has come to a complete stop. When working with the multi-function accessory, the appliance can only be switched on if the drive unit is screwed tightly in place. Important: Only fit and remove the basic unit to/ from the drive unit of the multi-function accessory when the appliance has come to a complete stop. Universal blade (14) For chopping meat, hard cheese, onions, herbs, garlic, fruit, vegetables, nuts, and almonds. It is important to note the maximum quantities in the table (Fig. G). Risk of injury due to sharp blade. Never touch the blade in the bowl. Do not clean the universal blade using bare hands. Always use a brush. Only handle the universal blade by the plastic part. Caution: Before chopping meat, ensure that all gristle, bones and tendons have been removed. The multi-function accessory is not suitable for chopping very hard materials (e.g. coffee beans, radishes, nutmeg) or frozen food (e.g. fruit). Preparation Fig. C • Place the bowl on a smooth, clean work surface and press down. • Insert the blade. • Place the food in the bowl. • Place the drive unit on the bowl with the pusher inserted (align arrow a on the drive unit with any catch b on the bowl) and turn in an anti-clockwise direction until it clicks into place. If the bowl contains larger quantities of ingredients, it may be difficult to fi t the drive cover. If required, twist the three-winged coupling on the underside of the drive unit into the correct position. When locking the drive cover in place, ensure that the shaft of the cutting knife is sitting vertically in the beaker (see picture C-4b). • Place the basic unit on the drive unit and allow to click into place. Ensure that the appliance audibly engages into position on the drive insert. Otherwise, the appliance coupling may be seriously damaged. • Plug in the mains plug. Robert Bosch Hausgerate GmbH en • Hold the basic unit and the bowl fi rmly and switch on the appliance. In general, the turbo speed is recommended for processing food with the multi-function accessory. • When you have fi nished processing, release the On/Off switch. • Unplug the mains plug Chopping inserts (15A, 15B, 15F, 15G) Risk of injury due to sharp blade. Pay particular attention when handling the inserts. Note the shape and position of the insert when inserting into the carrier disc. Only handle the carrier disc using the recessed handles provided. Cutting insert - coarse (A) Set the basic unit to the required speed (we recommend low) for cutting: gherkins, carrots, and potatoes. Cutting insert - fi ne (B) Set the basic unit to the required speed (we recommend low) for cutting: gherkins, carrots, beetroot, courgettes. Grater insert - medium-fi ne (F) Set the basic unit to the required speed (we recommend high) for grating: apples, carrots, cheese, white cabbage. Grater disc insert - coarse (G) Set the basic unit to the required speed (we recommend high) to grate ingredients for: dumplings, potato fritters and crunchy salads. Caution: Do not process hard foods, e.g. parmesan, chocolate, etc. using the cutter or grater disc inserts (A, B, F or G). The cutter, shredder and grater disc inserts (A, B, F or G) are suitable to only a limited extent for processing stringy food, such as leeks, rhubarb and celery. Preparation Fig. D • Place the bowl on a smooth, clean work surface and press down. • Place the required insert into the carrier disc. Note the shape and position of the insert (fi g. D-1a). • Place the carrier disc onto the pivot on the base of the bowl. • Place the drive unit on the bowl with the pusher inserted (align arrow a on the drive unit with any catch b on the bowl) and turn in an anti-clockwise direction until it clicks into place. Risk of injury due to sharp blade. Never insert fingers into the filling hole during operation. Always use the pusher (13) to push ingredients into the beaker. • Place the basic unit on the drive unit and allow to click into place. • Plug in the mains plug. • Hold the basic unit and the bowl fi rmly and switch on the appliance. Set the required speed. First switch on the appliance, set the speed, and then place the food to be chopped or grated in the bowl. • Fill the bowl with the food to be choppe...
Dieses Handbuch ist für folgende Modelle:Standmixer - MSM7800AU/02 (2.49 mb)