Stimmen - 4, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Braun Dateigröße: 1.82 mb Dateiname: Unterrichtssprache:

You may also use the turbo switch for instant powerful pulses without having to manipulate the speed regulator. Depending on the application, we recommend the following speed settings: Handblender 1...turbo Chopper 1...turbo Whisk 1...15 How to operate your handblender The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing drinks and milkshakes. 1. Insert the motor part A into the blender shaft until it locks. F 2. Introduce the handblender in the vessel, then press the on/off switch B or the turbo switch C . 3. To release the blender shaft after use, press buttons D and pull it off. You can operate the handblender in the measuring beaker G , and just as well in any other vessel. When blending directly in the saucepan while cooking, take the pan from the stove first to protect your handblender from overheating. How to operate your whisk Use the whisk only for whipping cream, beating egg whites and mixing sponges and ready-mix desserts. 1. Insert the whisk I into the whisk gear box H , then insert the motor part A into the gear box until it locks. 2. Place the whisk in a vessel and only then, press switch B to operate it. 3. To release, press buttons D and pull off the gear box. Then pull the whisk out of the gear box. For best results: • Do not use the beaker G , but a wider bowl. • Move the whisk clockwise, holding it slightly inclined. Whipped cream Only whip up to 400 ml chilled cream (min. 30 % fat content, 4 – 8 °C). Start with a low speed setting (1) and while whipping, increase the speed to setting 15. Egg snow Only whip up to 4 egg whites. Start with a medium speed setting (7) and while beating, increase the speed to setting 15. How to operate your chopper attachment (a) Chopper gear box (b) Blade (c) Chopper bowl (d) Anti-slip base/lid a b c d The chopper is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds etc. For chopping hard goods (e.g. hard cheese), use the turbo switch C . N.B.: Do not chop extremely hard food, such as ice cubes, nutmeg, coffee beans, and grains. Before chopping ... • pre-cut meat, cheese, onions, garlic, carrots (see table page 5) • remove stalks from herbs, un-shell nuts • remove bones, tendons and gristle from meet. 1. Caution: Carefully remove the plastic cover from the blade (b). The blade is very sharp! Always hold it by the upper plastic part. Place the blade on the centre pin of the chopper bowl (c). Press it down until it locks. Always place the chopper bowl on the anti-slip base (d). 2. Place the food in the chopper bowl. 3. Put the gear box (a) on the chopper bowl. 4. Insert the motor part A into gear box (a) until it locks. 5. Press switch B or C to operate the chopper. During processing, hold the motor part with one hand and the chopper bowl with the other. 6. After use, press buttons D to remove the motor part. 7. Then remove the gear box. 8. Carefully take out the blade. 9. Then remov...

Herunterladen

Geben Sie zwei Ziffern: