Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Kalorik Dateigröße: 296.67 kb Dateiname: BL24242-BL25280_IB.pdf Unterrichtssprache:

Pulse function The position "P" (Pulse) is particular because the button has to be kept manually. This position is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing. The blender runs in high speed as long as you push the 5 USK BL 24242/BL 25280 -090602 button. This button is only intended for short powerful bursts, not continued use. You might damage your appliance is using the “Pulse button” continuously. Smoothie function Press “smoothie button”, the blender keeps on running in high speed. After pressing the “smoothie button” again, the blender will stop working and all the three indicator lamps will flash. Ice crushing function Your blender is equipped with six blades and is perfectly adapted to ice crushing. Press the “ice button”, the blender runs in 1 second blending and 0.5 second stop cycles, the pilot light is ON (the other two indicator lamps are OFF). Once the desired level of grinding is achieved, press the “ice button” again, the motor will stop working and all the three indicator lamps will flash. Note : These three push buttons can be pushed at wish, no matter what situation it is running. The rotation speed is factory set for each function, and the rotary speed control is disabled in case the automatic functions such as “Ice Crushing” or “Smoothie” are selected. The Blender always runs in high speed in such situation. • It is also possible to add liquids or other ingredients anytime without stopping the appliance. You only have to remove the cap, which closes the feeding opening by turning and raising it straight up. • Once you have finished the preparation, stop the appliance and unplug the appliance. • Remove the jar from the base. Then remove the lid and pour the liquid in the desired receptacle. 6 USK BL 24242/BL 25280 -090602 Manual Speed setting Turn the rotary knob from “MIN” position to “MAX” position to select the desired speed. The blender runs from low speed to high speed. In manual speed setting, the “ice button”, “smoothie button” and “pulse button” are disabled • Blender stops running if the current is above the limitation and the pilot light of “pulse button” flashes, press “pulse button” again and the appliance resume working. • No matter in what mode the blender is working, just lift glass jug from the motor block to stop the appliance. To resume operating the blender, set the speed rotary knob back to “off” position, replace the jug, select the “On” position and choose the function or turn the rotary knob to select speed. HOW TO CLEAN • Always unplug from outlet before cleaning. • For a quick rinsing of the pouring jar (for example between two preparations), you can use clear water and switch on your appliance for a few seconds. In this case, do not use any detergent. • For a full cleaning of the pouring jar, remove it from the motor block and unscrew the base of the blade assembly by turning it anti-clockwise to disassemble it (this will make the cleaning easier). Then you can clean the blades and the jar with soapy water and rinse thoroughly with clear water. Dry before assembling. Therefore you only have to screw the blades support by turning it clockwise in the bottom of the pouring jar (tighten vigorously in order to avoid leaks). Attention, do not lose the sealing ring during this operation. • You can wipe the motor block with a soft damp cloth. • IMPORTANT : the borosilicate jar of your blender is designed to support sudden temperature variations up to 50°C / 125°F. After preparing an icy preparation, it is important to avoid cleaning the jar with very hot water immediately afterwards, or the glass may shatter. Likewise, after preparing a hot preparation like soup, please do not rinse with very cold water immediately afterwards. 7 USK BL 24242/BL 25280 -090602 WARRANTY We suggest that you complete and return the enclosed Product Registration Card promptly to facilitate verification of the date of original purchase. However, return of the Product Registration Card is not a condition of these warranties. You can also fill this warranty card online, at the following address: This KALORIK product is warranted for 1 year from the date of purchase against defects in material and workmanship. This warranty is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. During this period, the KALORIK product that, upon inspection by KALORIK, is proved defective, will be repaired or replaced, at KALORIK's option, without charge to the customer. If a replacement product is sent, it will carry the remaining warranty of the original product. This warranty does not apply to any defect arising from a buyer's or user's misuse of the product, negligence, failure to follow KALORIK instructions noted in the user’s manual, use on current or voltage other than that stamped on the product, wear and tear, alteration or repair not authorized by KALORIK, or ...

Herunterladen

Geben Sie zwei Ziffern: