Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
It is necessary to make temporary stops. Check the section "Important information" in the instruction manual. 14. It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food. 2 USK BL 24691 BL 32765 -100326 • 15. The pouring jar should be assembled correctly on the motor base before you plug it into the mains. The appliance is equipped with a safety, which prevents the pouring jar from working if it is not assembled correctly. Furthermore the pouring jar should be locked so that the appliance can work. 16. The appliance is designed for the preparation of small quantities of food, which have to be consumed rather quickly. It is not designed for the preparation of large quantities at once. 17. Keep hands and utensils out of container while blending to reduce the risk of severe personal injury and/or damage to blender. A rubber spatula may be used but must be used only when blender is not running. 18. Do not use a broken, chipped or cracked blender jar. 19. To reduce the risk of injury, never place the cutting unit blades on base without jar properly attached. Blades are sharp, handle with care. 20. Always operate the blender with cover in place. 21. Always close the jar with the lid before starting mixing. When mixing hot liquid, do not fill more than 2/3 of the jar and be very careful in order to avoid splashing of hot liquid, otherwise you can get burned. Do not forget to close the feeding hole of the pouring jar with the cap. 22. Screw on blade assembly firmly. Injury can result if moving blades accidentally become exposed. 23. Do not leave blender unattended while it is operating. 24. To disconnect, press the ON/OFF key, then remove the plug from wall outlet. SAVE THESE INSTRUCTIONS 3 USK BL 24691 BL 32765 -100326 • POLARIZED PLUG INSTRUCTIONS This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way. SHORT CORD INSTRUCTIONS A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Extension cords may be used if care is exercised in their use. • The electrical rating of the extension cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn. • The resulting extended cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. PART DESCRIPTION 1. Cap 2. Lid 3. Pouring jar 4. Blade assembly 5. Motor block 6. Control panel 4 USK BL 24691 BL 32765 -100326 • IMPORTANT INFORMATION This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. The maximum continuous usage time is 3 minutes. After 3 minutes of continuous use, you should insert a break of at least 10 minutes. ASSEMBLY OF THE BLENDER AND USE If the blade is disassembled from the bottom of the jar, check the cleaning section for mounting instructions before continuing. • Assemble the pouring jar on the motor block and make sure it is correctly positioned, otherwise the appliance will not work. Some guides are indicated on the jar and on the motor block to help you position the jar. • Remove the lid of the blender. • Fill the pouring jar with the chosen ingredients. • Close the lid. • Plug in the appliance. • Choose the mixing speed with the button on the motor base. The position 0 corresponds to the stopping of the appliance, the position 1 to the slow speed and the position 2 to the fast one. • The position "P" (Pulse) is particular because the button has to be kept manually. This position is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing. • It is also possible to add liquids or other ingredients anytime without stopping the appliance. You only have to remove the cap, which closes the feeding opening by turning and raising it straight up. • Once you have finished the preparation, stop the appliance (position 0) and unplug the appliance. • Remove the jar from the base. Then remove the lid and pour the liquid in the desired receptacle. 5 USK BL 24691 BL 32765 -100326 • HOW TO CLEAN • Always unplug from outlet before cleaning. • For a quick rinsing of the pouring jar (for example between two preparations), you can use clear water and switch on your appliance for a few seconds. In this case, do not use any detergent. • For a full cleaning of the pouring jar, remove it from the motor block and unscrew the base of the blade assembly by turning it anti-clockwise to disassemble it (this will make the cleaning easier). Then you ...