Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Kalorik Dateigröße: 370.88 kb Dateiname: Unterrichtssprache:

Return appliance to the nearest authorized service facility for examination, repair, or adjustment. 7. The use of accessory attachments, including the pouring jar, not recommended by the appliance manufacturer may cause injuries. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect remove the plug from the wall outlet. 12. Do not use appliance for other than intended use. 13. This kind of appliance cannot function continuously; it is not a professional type of appliance. It is necessary to make temporary stops. Check the section "Important information" in the instruction manual. 14. It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food. 2 USK BL 24088 BL 25887 -100603 • 15. The pouring jar should be assembled correctly on the motor base before you plug it into the mains. Furthermore the pouring jar should be locked so that the appliance can work. 16. The appliance is designed for the preparation of small quantities of food, which have to be consumed rather quickly. It is not designed for the preparation of large quantities at once. 17. Keep hands and utensils out of container while blending to reduce the risk of severe personal injury and/or damage to blender. A rubber spatula may be used but must be used only when blender is not running and unplugged 18. Do not use a broken, chipped or cracked blender jar. 19. To reduce the risk of injury, never place the cutting unit blades on base without jar properly attached. Blades are sharp, handle with care. 20. Always operate the blender with cover in place. 21. Always close the jar with the lid before starting mixing. When mixing hot liquid, do not fill more than 2/3 of the jar and be very careful in order to avoid splashing of hot liquid, otherwise you can get burned. Do not forget to close the feeding hole of the pouring jar with the cap. 22. Screw on blade assembly firmly. Injury can result if moving blades accidentally become exposed. 23. Do not leave blender unattended while it is operating. 24. To disconnect, let the ON/OFF switch in off position, then remove the plug from wall outlet. SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY Other important remarks: • When not in use for a long time, store in a dry place, with good ventilation • Never open the lid while blending. Wait until the full stop of the blades before adding food. Always unplug from the mains before inserting the hand or any utensils in the jar. 3 USK BL 24088 BL 25887 -100603 • POLARIZED PLUG INSTRUCTIONS This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. SHORT CORD INSTRUCTIONS A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Extension cords may be used if care is exercised in their use. • The electrical rating of the extension cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn. • The resulting extended cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. PART DESCRIPTION 1. Cap 2. Lid 3. Pouring jar 4. Blade assembly (not shown) 5. Motor block 6. Control panel / switch 123456 4 USK BL 24088 BL 25887 -100603 • IMPORTANT INFORMATION This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. The maximum continuous usage time is 10 seconds. After 10 seconds of continuous use, you should insert a break of at least 3 seconds. Don’t make this unit work continuously more than one minute. Stop working when the outer housing becomes hot. In order to prolong the life of the unit, please continue to use this unit only when it has cooled down. The unit has a motor-protecting device. The power is automatically switched off when the temperature of the motor is too high. The blender can resume operation automatically after it has cooled down (approximately after 15 minutes). ASSEMBLY OF THE BLENDER AND USE NOTE: Do not operate with nothing in the cup. Water or other liquids must be added, with a maximum total volume of 500ml /16 . Fl. Oz. • Assemble the pouring jar on the motor block and make sure it is correctly positioned; otherwise the appliance will not work. Position the jar vertically above the motor block and turn counter-clockwise to lock it in place. • Remove the lid of the blender. • Fill the...

Herunterladen

Geben Sie zwei Ziffern: