Stimmen - 6, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Allow cooked food to cool before placing in the chopping bowl. Press on the switch for 2 to 3 seconds and then let go. Repeat this procedure until the food has reached the desired consistency. 3. Disconnect the unit from the power source. After the blade has fully stopped, remove the chopper gear box and the chopper gear box adapter. Using a rubber spatula, remove the chopped or minced food from the glass beaker. Caution: Never put your fingers or any utensils in the Stick Blender/Chopper during operation. Crushing Ice Caution - Blades are sharp. Use extreme caution when handling the blade, always hold it by the plastic hub. Do NOT immerse Power Pack in water or any other liquid. Ensure that the chopper gear box, chopper gear box adapter and blade assembly is well seated before turning the unit on to chop ice. Hold appliance with BOTH hands when chopping ice. 1. Assemble the chopper as you would for chopping (see page 5 for assembly instructions). 2. Place ice cubes to be crushed into bowl. 3. Hold the power pack firmly with one hand and pulse the On/Off switch with your index finger as you hold the glass beaker firmly with the other when you are crushing ice cubes. Note: Recommended size of ice cubes is 1 1/4” x 1” x 3/4”. Do not crush more than 6 oz. of ice cubes at a time. Warning: This appliance is intended for intermittent use. When crushing ice, use only bursts of 4 seconds each. Run time not to exceed 15 seconds before allowing unit to cool down. Caution: Hold both the bowl/ gear box and power pack when chopping ice. Don’t hold appliance by the power pack only. 6 1. After assembling the unit, hold the power pack with your hand, press and hold down on the On/Off switch with your index finger. 2. To avoid the food from being over processed, use the pulse method of chopping and mincing. OPERATING INSTRUCTIONS cont. Multi- Mixer Assembly Caution: Ensure that the appliance is unplugged from the electrical power source before changing attachments. Do not immerse the mixer gear box in water. 1. To attach the mixer gear box to the Power Pack, line up arrow on the Power Pack and Mixer Gear Box. 2. Push Power Pack onto Mixer Gear Box until seated. 3. While grasping Mixer Gear Box rotate it 90. clockwise until the arrow on the Power Pack aligns with the “Square” on the Mixer Gear Box. 4. To disassemble Mixer Gear Box and Power Pack rotate Mixer Gear Box 90. counterclockwise. Attaching the Attachments to the Mixer Gear Box Caution: Ensure that the appliance is unplugged from the electrical power source before changing attachments. Do not immerse the mixer gear box in water. Select the desired attachment, either the Dough Hooks, Wire Beaters or Whisk and assemble to Mixer Gear Box as noted below: A) Dough Hooks ( 2) For use with light dough ONLY. • Insert stem end of dough hooks (one at a time) into opening in base of Mixer Gear Box. • Rotate slightly while pressing gently until dough hook “Clicks” into place. • Repeat for second dough hook. • Ensure that dough hooks are well seated in Mixer Gear Box. B) Wire Beaters (2) Follow same installation procedure as above. C) Wire Whisk This attachment is used for beating air into mixtures such as egg whites, yolks or creams.. • To install, place stem of Wire Whisk into either of the openings in the Mixer Gear Box. • Rotate Wire Whisk while pushing gently until Wire Whisk “Clicks” into place. • Ensure that Wire Whisk is well seated in Mixer Gear Box. 1. After attaching the desired accessory into the mixer gear box, plug the mixer into power source. 2. Hold the power pack with one hand and press and hold the On/Off switch with your index finger. 3. Ensure that there are no obstructions and that the accessories are moving freely in the mixing container. 4. When finished using the unit, unplug the unit before removing the accessories. 7 OPERATING INSTRUCTIONS cont. Care & Maintenance Caution: Ensure that the appliance is unplugged from the electrical power source before changing or cleaning attachments. Do not immerse the mixer gear box in water. 1. The unit and the various attachments should be cleaned after each use. 2. All accessories and glass beaker can be cleaned with warm soapy water. 3. Use a damp cloth or sponge to clean the housing of the power pack. Do NOT immerse in water or any other liquid. Caution: Use extreme caution when cleaning the chopper blade or metal stick blender because blades are SHARP. Storing Your Unit You may store your unit in the wall bracket provided. Do NOT wrap power cord around unit. Coil the cord in loose loops and tie with a tye wrap or twist tie. It is recommended that the chopping blade be stored inside the glass beaker as blade is very sharp. 8 ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material andworkmanship for a period of one ( 1) year from the date of purchase when utilized for normalhousehold use. If your appliance fails to operate properly while in use under normal hous...