Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
To turn it off, please switch the power switch to the “O” position. Thank you for buying the new BT90S Traveller Speaker and, or the BT65N Stereo Audio Adaptor. You can use the A/C power adapter (optional, not provided) to power up the BT90S directly or place 3 AAA dry batteries into the BT90S to obtain the power. Bluetooth Bluetooth I.Traveller Speaker paired with Bluetooth enabled (with A2DP and AVRCP profiles) Mobile Phone / PDA /MP3 Guide 1. Battery cover(Insert 3 AAA batteries). 2. Power ON/OFF switch. 3. DC power input socket(5VDC). 4. Audio input socket. 5. Backward switch.(only applied to audio devices supporting A2DP and AVRCP Profiles) 6. Volume Down switch. 7. Forward switch. (only applied to audio devices supporting A2DP and AVRCP Profiles) 8. ON/OFF/Pairing/Pause switch. a) When BT90S is powered on, press and hold (about 2 seconds) until LED flashes Green to turn ON. b) When BT90S is powered on, press and hold (about 4 seconds) until LED flashes Green and Red alternatively to enter into pairing mode. c) When BT90S is powered on, press and hold (about 4 seconds) until LED turns red to turn OFF when playing. d) Press it once when playing --- Pause Press it once again --- Resume play 9. Volume Up switch. Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth 10. a) LED flashes Green -- is ON b) LED flashes Green and Red alternatively -- enters into Pairing mode c) LED is red -- will be powered OFF 11. Power LED is Blue -- BT90S is Power ON Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth 1 2 3 BT90S Traveller Speaker And BT65N Audio Adaptor (optional) User Manual Bluetooth Bluetooth THREE possible User Scenarios 1. A/C Adapter and 3 AAA battery...............................................................1 2. Turning on / Turning off the Traveller Speaker and the Audio Adaptor.........1 3. Function Keys......................................................................................1 .........................................................................2 . Traveller Speaker paired with enabled (with A2DP and AVRCP .................... . ........... .............. .... . ............... . ................ ............. I Bluetooth profile) Mobile Phone / PDA / MP3 Guide............. .......2 1.Pairing..................... ............ .................................................3 2.Listening to music................. ........... ................................3 . Traveller Speaker paired with Stereo Audio Adaptor BT65N Guide..... .....4 1.Pairing............................. ........................................ ..........4 2.istening to music...................... ........................................5 . Traveller Speaker connected directly with Audio Device Guide................5 1.listening to music..............................................................................5 Accessories Table...............................................................................5 FCC Interference Statement......................... ..................................6 II III When you purchase a Standalone pack with BT90S Traveller Speaker only, please follow this Guide. 1. Pairing a. While the Speaker is powered off, switch the power ON/OFF switch (Key 2) to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) will become blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 5, Fig.2) for 4 seconds, the LED will flash red and green alternatively, which indicates the Speaker in Pairing Mode. The Pairing Mode will last for one minute. b. Put the Speaker and the enabled (with A2DP and AVRCP profiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters. c. Follow the operation instructions of your enabled (with A2DP and AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairing process. Typically, this has to be done by going to a setup or connect menu to discover the Speaker. It may take some time to search it depending on the number of devices nearby. d. Your Mobile Phone / PDA / MP3 will display the model name “BT90S“ if it has found the Speaker; and ask for a passkey. Enter a sequence of “0000“. After successful pairing, follow the instructions to establish the connection with the Speaker. e. If the pairing is successful, the LED will flash green, which indicates it is in Standby Mode and ready to receive audio signals from the Mobile Phone / PDA / MP3. If pairing does not occur as expected, turn the Traveller Speaker and the audio device off. Wait for 10 seconds and repeat the pairing process from the beginning (Fig.4). 2. Listening to music a. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listen to the music from the Speaker. b. The speaker volume can be adjusted by pressing the VOL Up button (Fig.2) / VOL Down button (Fig.2). Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth enabled PDA Bluetooth Traveller Speaker Bluetooth mobile phone (Fig.1) (Fig.2) (Fig.3) (Fig.4) 210.00 mm 297...
Dieses Handbuch ist für folgende Modelle:Wireless Zubehör - BT65N (1.08 mb)