Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Nokia BH-304 |
Anleitung Zusammenfassung
When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Charge the battery The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device. 1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector. The red indicator light is on while charging. It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 1 hour and 30 minutes. 3. When the battery is fully charged, the indicator light turns to green. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours and 30 minutes of talk time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power falls low, the headset beeps, and the red indicator light starts to flash. Switch the headset on or off To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly. Pair the headset 1. Ensure that your mobile device is switched on and the headset is switched off. 2. Press and hold the power key until the green indicator light starts to flash quickly. 3. Activate the Bluetooth feature on the mobile device, and set the device to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your device. In some devices you may need to make the connection separately after pairing. You only need to pair the headset with your device once. If the pairing is successful, the headset beeps and appears in the device menu where you can view the currently paired Bluetooth devices. Basic use Place the headset on the ear The headset is ready to be used on your right ear. Slide the earloop over your ear (9), and point the headset toward your mouth (10). To use the headset on the left ear, rotate the earloop so that the loop is to the left of the "Nokia" logo (11). Change the cover The headset may be supplied with front covers in different colors. To change the cover, pull the current cover starting from the top (12), and push the new cover into place. Call handling To make a call, use your mobile device in the normal way when the headset is connected to the device. If your device supports last number redialing with the headset, press the answer/end key twice while no call is in progress. If your device supports voice dialing with the headset, press and hold the answer/end key when no call in progress, and proceed as described in the user guide of your device. To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice. To adjust the headset volume, press the volume key up or down. To mute or unmute the microphone, press the middle of the volume key. To switch the call between the headset and a compatible device, press and hold the answer/end key. Clear settings or reset To clear all the pairing settings from the headset, switch off the headset, and press and hold the power key and the answer/end key until the red and green indicator lights start to alternate. Battery information To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and press the power key and the answer/ end key at the same time. Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Never use any charger that is damaged. Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain mine...