Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
The blue indicator light is continuously displayed during charging. The headset is switched off and cannot be used during charging. 4. When the battery is fully charged, the blue indicator light switches off. Disconnect the charger from the wall outlet or the accessory power outlet and the headset. When you disconnect the power cord of the charger, grasp and pull the plug, not the cord. The fully charged battery has power for up to 6 hours of talk-time or up to 110 hours of standby time. (In the standby mode, the headset is switched on but no call is in progress.) When the battery is running out of power, the red indicator light lights up. Charge the battery. ¦ Switch the headset on or off To switch on, press the answer/end key for about 1 second. To switch off, press and hold the answer/end key for about 5 seconds. ¦ Pair the headset with a compatible phone Make sure that the headset is on, and put it in pairing mode by pressing the answer/end key and the volume up (+) key at the same time over 5 seconds until the blue indicator light lights up. The indicator light 6 9239356_hs36w_1_en.fm Page 7 Saturday, August 20, 2005 3:25 PM Get started remains on for 5 minutes, during which you can pair the headset with a compatible mobile phone. 1. Set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 2. When your phone finds the headset, confirm the pairing from your phone. 3. When prompted for the Bluetooth passcode of the headset, enter 0000. If the pairing was unsuccessful, try to pair the devices again. You only need to pair the headset with your phone once. If the pairing was successful, the blue indicator light starts to flash. The headset is now in the standby mode and ready for use. 7 English 9239356_hs36w_1_en.fm Page 8 Saturday, August 20, 2005 3:25 PM Basic use 3. Basic use ¦ Wear the headset on either ear The headset is ready to wear on the right ear. If you want to use it on the left ear, gently flip (1) and rotate the earhook (2). ¦ Call handling To answer a call, press the answer key on your mobile phone, or press the answer/end key on the headset briefly. If you do not want to answer a call, press and hold the answer/end key on the headset for about 1 second. To make a call, dial the number with your mobile phone, and press the answer key on your phone. The call is automatically transferred to the headset. To redial the last called number, press and hold the answer/end key on your headset for about 1 second when no call is in progress. If your phone supports voice dialing and there is no call in progress, press the answer/end key on the headset briefly, and proceed with voice dialing as described in the user guide of your phone. For the best result, record the voice tag through your headset. To increase or decrease the volume of the headset, press either volume key until the satisfactory volume level is reached. To end a call, press the end key on your mobile phone, or press the answer/end key on your headset briefly. 8 9239356_hs36w_1_en.fm Page 9 Saturday, August 20, 2005 3:25 PM Basic use ¦ Store the headset properly Always store the headset with the power off and safely protected. Avoid storage in high temperatures (above 60°C/134°F), such as in a hot vehicle or in direct sunlight. Storage in high temperatures can degrade performance and reduce the battery life. Low temperatures (down to -10°C/14°F) shorten the battery life and may affect operation. ¦ Troubleshooting The audio quality is poor. For optimal performance, wear the headset and your mobile phone on the same side of your body or in line of sight. I have pairing problems even though my phone indicates otherwise. You may have deleted the headset pairing in your mobile phone. Pair the devices again. There is no audio in the headset. Do the following: • Increase the volume on the headset by pressing the volume up (+) key. • Ensure that the headset is paired with the phone. • Make sure that the phone is connected to the headset. If not, try to pair the devices again. 9 English 9239356_hs36w_1_en.fm Page 10 Saturday, August 20, 2005 3:25 PM Battery information 4. Battery information Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of th...