Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
3. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the wall outlet and the headset. The fully charged battery has power for up to 5 hours of talk- time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones, products that use a Bluetooth connection, usage settings, usage styles, and environments. When the battery is running out of power, the headset beeps, and the red indicator light starts to flash. ¦ Switch the headset on or off To switch on, press the power key for 3 seconds. The headset beeps, and the green indicator light starts to flash quickly. The flashing is slower after the headset is connected to your phone. To switch off, press and hold the power key for 2 seconds. The headset beeps, the red indicator light is displayed briefly. ¦ Pair the headset with a compatible phone 1. Switch on your phone Copyright 2005 Nokia. reserved. 2. 2. 3. Select the headset (Nokia HS- 26W) from the list of found devices. 4. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the headset with your phone once. 5. If the pairing was successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. Disconnect the headset from the phone To disconnect the headset from your phone (for example, to connect the phone to another Bluetooth device), do one of the following: • Switch off the headset. • Disconnect the headset in the Bluetooth menu of your phone. • Move the headset more than 10 meters (30 feet) away from the phone. You do not need to delete the pairing with the headset to disconnect it. Reconnect the paired headset phone To connect the headset to switch on the headset, make the connection in the Bluetooth your phone, or press and hold the end key. Copyright 2005 Nokia. reserved. You can set your phone to connect with the headset automatically when the headset is switched on. To do this in Nokia phones, change your paired device settings in the Bluetooth menu. ¦ Troubleshooting If you cannot connect the headset to your phone, do as follows: • Ensure that the headset is charged, switched on, paired with and connected to your phone. • Ensure that the Bluetooth feature is activated on your phone. • Check that the headset is within 10 meters (30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices. • If the headset stops functioning, although it has been charged, reset the headset by pressing the power key and the middle part of the volume key briefly, while the headset is plugged into a charger. This reset does not clear your settings (for example, pairing settings). Copyright 2005 Nokia. reserved. 3. 3. e ¦ Place the headset on the ear Slide the headset onto your ear as shown in the figure.. ¦ Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports redialing, press the answer/end key twice briefly while no call is in progress. If your phone supports voice call is in progress, and in the user guide of your phone. Copyright 2005 Nokia. reserved. To answer a call, press the answer/ end key, or use the phone keys. If the automatic answer function is set on in your phone, the phone automatically answers the incoming call after one ring. To answer a call, press the answer/ end key, or use the phone keys. If the automatic answer function is set on in your phone, the phone automatically answers the incoming call after one ring. ¦ Adjust the earphone volume Press the volume key up to increase or down to decrease the volume during a call. To adjust the volume quickly, press and hold the key in the desired direction. ¦ Mute or unmute the microphone To mute or unmute the microphone during a call, press the middle part of the volume key briefly. A long tone is played. When the microphone is muted, the green indicator light flashes continuously. ¦ Switch the call between phone and headset To switch the call between the headset and a compatible Nokia phone, press and hold the answer/end key, or use the respective function in your phone. ¦ Use the headset with several phones You can pair the headset with up to eight phones but connect it to only one phone at a time. Copyright 2005 Nokia. reserved. The phone that was first paired with the headset is the default phone. If the headset is switched on within 10 meters (30 feet) of several paired phones, the headset tries to connect to the default phone. The phone that was first paired with the headset is the default phone. If the headset is switched on within 10 meters (30 feet) of several paired phones, the headset tries to connect to the default phone. ¦ Clear the settings If you want to clear all the set...