Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Nokia
Dateigröße: 110.64 kb
Dateiname: Nokia_BH-602_APAC_UG_EN.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Push or pull the earloop to set its length. Set the headset so that it points toward your mouth (2). 12 Basic use To use the headset on the left ear, rotate the earloop so that the loop is to the left of the Nokia logo (3). 3 ¦ Call handling To make a call, use your mobile device in the normal way when the headset is connected to it. If your device supports last number redialing with the headset, press the answer/end key twice. If your device supports voice dialing with the headset, press and hold the answer/end key until the mobile device starts Basic use voice dialing, and proceed as described in the user guide of the device. Voice dialing cannot be used during a call. To answer a call, press the answer/end key, or use the keys of the mobile device. When you receive a call, the indicator light flashes blue quickly, and you hear a ringing tone through the headset. To reject an incoming call, press the answer/end key twice, or use the keys of the mobile device. To end a call, press the answer/end key, or use the keys of the mobile device. To answer a waiting call and put the current call on hold, press and hold the answer/end key. To answer a waiting call and end the current call, press the answer/end key briefly. To reject a waiting call, press the answer/end key twice. To switch between the active call and the call on hold, press and hold the answer/end key. To end the active call and make the call on hold active, press the answer/end key. To use these features, your mobile device must support the Bluetooth Hands-Free profile 1.5, and call waiting must be set to on in your device. Call waiting is a network service. Basic use ¦ Adjust the headset volume The headset automatically adjusts the volume according to ambient noise. To set the minimum volume, press the volume key up to increase or down to decrease the volume, or use the keys of the mobile device. To adjust the volume quickly, press and hold the volume key in the desired direction. ¦ Mute or unmute the microphone To mute or unmute the microphone during a call, press the middle of the volume key. ¦ Switch the call between headset and mobile device To switch the call from the headset to the connected mobile device, press and hold the power key for about 2 to 3 seconds (the headset switches off), or use the respective function in your device. To switch the call back to the headset, switch on the headset, or press and hold the answer/end key (when the headset is on). Basic use ¦ Turn off indicator light To turn the indicator light off or on, briefly press the power key and the answer/end key at the same time when no call is in progress. When the indicator light is off, it is not shown when the headset is connected to a device, when you handle calls, or when the microphone is muted. When you switch on the headset, the indicator light is enabled. ¦ Clear settings or reset To clear all the pairing settings from the headset, press and hold the power key and the answer/end key until the headset beeps and the indicator light alternates red and green. To reset the headset if it stops functioning, although it is charged, plug the charger into the headset, and briefly press the power key and the answer/end key at the same time. The headset switches off. To use the headset, reconnect it to your mobile device. The reset does not clear the headset settings. Battery information 4. Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Never use any charger that is damaged. Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Battery information Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. • Do not store the device...